Free HP HPE0-S22 Test Practice Test Questions Exam Dumps
Prepare Top HP HPE0-S22 Exam Audio Study Guide Practice Questions Edition
To get more details visit:
HPE Master ASE - Server Solutions Architect (HPE0-S22) Exam Reference
NEW QUESTION 14
An architect needs to determine whether a customer is ready to move to a software-defined data center (SDDC).
Which additional information should the architect obtain from the customer to verify this?
- A. whether they have a disaster recovery plan implemented
- B. whether they have a management and automation solution implemented
- C. whether they have a workplace mobility plan implemented
- D. whether they have standardized on a single vendor
Answer: B
NEW QUESTION 15
A customer needs a mission critical SQL database. The customer has an HPE StoreServ and plans to use this as storage.
The solution must meet the following requirements:
- 240 logical cores (Hyper-Threading enabled)
- support for 6TB Memory
- 16GB FC
- 35TB RAID 1 storage
- the ability for hardware partitioning to build different physical partitions and scale as the need for CPU and memory resources grows Which solution should the architect recommend?
- A. HPE SL6500 with SL230s nodes
- B. HPE Apollo 4200 with HPE ProLiant XL170r nodes
- C. HPE Superdome X with BL920s blades
- D. HPE ProLiant 980 Server
Answer: C
NEW QUESTION 16 
An architect proposes an HPE Moonshot solution to a customer. The customer informs the architect that the data center switches can only provide four 40GbE ports per rack.
How should the architect modify the proposed solution so that each rack meets the requirement?
- A. Use the iLO Chassis Management (CM) module port to daisy chain the chassis together and let the chassis in the daisy chain share uplinks
- B. Replace the 45XGc modules with the 180G module to aggregate uplink ports on multiple chassis into a single port
- C. Create two Intelligent Resilient Framework (IRF) fabrics, each with four switch modules, and let the switches in each fabric share uplinks
- D. Use the iLO Chassis Management (CM) module port to support both iLO and production traffic on four of the HPE Moonshot chassis
Answer: A
NEW QUESTION 17
A customer needs a hosted physical desktop solution. Users will run typical office applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost- effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?
- A. HPE m710p
- B. HPE m400
- C. HPE m700
- D. HPE m710
Answer: A
Explanation:
Explanation/Reference: https://www.hpe.com/us/en/product-catalog/servers/moonshot-systems/pip.hpe-proliant-m710p- server-cartridge.8732043.html
NEW QUESTION 18
A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies.
Which solution should the architect recommend to help solve these issues?
- A. HPE Insight Remote Support
- B. HPE Power Advisor
- C. HPE Advanced Power Manager
- D. HPE OneView 2.x
Answer: C
Explanation:
References:
NEW QUESTION 19
Which of the HPE Transformation Areas should the architect discuss when the customer's concerns span backup and recovery, high availability, and disaster recovery?
- A. Enable workplace productivity.
- B. Protect the digital enterprise.
- C. Transform to a hybrid infrastructure.
- D. Empower the data-driven organization.
Answer: B
Explanation:
Explanation/Reference:
Reference https://community.hpe.com/t5/OEM-Solutions/Transformation-Areas-for-the-New-Style-of- Business/ba-p/6830963#.WQA-_Fi6wSw
NEW QUESTION 20
A customer's Gen9 web server resides behind a firewall.
What is the most secure and efficient method to monitor this server?
- A. Create Firewall rules and install WBEM.
- B. Create Firewall rules and install System Management Homepage in Protected Mode.
- C. Use Intelligent Provisioning.
- D. Use Agentless Management.
Answer: A
NEW QUESTION 21
A customer requires a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis fully populated with cartridges.
The populated chassis provide the following in total:
- 135 processors with four 2.9GHz cores each
- 4.23TB RAM
- 64.8TB local storage on SSDs
An aspect of the design is under provisioned and is likely to cause performance to degrade to one-tenth or even one-hundredth of its potential.
How can the architect resolve this problem?
- A. Select different cartridges that provide more nodes per cartridge
- B. Scale the memory capacity by selecting higher capacity DIMM's for the cartridges
- C. Select different cartridges that provide more processor cores
- D. Scale the SSD capacity by adding cartridges or selecting higher capacity SSDs
Answer: D
NEW QUESTION 22
An architect is presenting a file-based transcoding solution to a customer. The solution will include a single HPE Moonshot 1500 chassis that will be directly connected to HPE Apollo 4530 storage via
4 x QSFP uplinks.
The customer is concerned about the significant traffic that will generated between the HPE Moonshot 1500 chassis and the HPE Apollo 4530 storage.
Which factor should the architect design into the solution to address the customer's concerns?
- A. Add two HPN 5930 ToR switches with IRF
- B. Setup the solution so the cartridges use both adapters
- C. Install cartridges that have GPUs
- D. Add uplinks as the workload increases
Answer: A
NEW QUESTION 23
An architect plans to propose a solution and illustrate how it will reduce the predictable and repeatable costs for items and services not registered as assets.
Which reporting period information helps the architect achieve this goal?
- A. operating expenditure (OPEX)
- B. total cost of acquisition (TCA)
- C. gross profit (GP)
- D. internal rate of return (IRR)
Answer: A
NEW QUESTION 24
What is one advantage of hard partitioning, or nPartitioning, for HPE Integrity Superdome X as compared to virtual partitioning?
- A. It enables HPE Helion CloudSystem to deploy VMs to the Integrity Superdome X System
- B. It allows a single blade to support more guest operating systems
- C. It permits the flexibility to assign different processor cores on the same processors to different partitions
- D. It provides greater reliability because partitions are electronically isolated
Answer: D
NEW QUESTION 25
An architect is planning an HPE Integrity Superdome X solution with the following nPartitions:
nPar 1= Slots 1, 3, and 5
nPar 2 = Slots 2, 4, and 6
The Superdome X solution must connect to a Fibre Channel SAN solution, which provides boot disks for the Superdome X solution.
The architect has selected a Flexible LOM adapter for each blade.
What is a valid plan for additional adapters?
- A. one 2-port FC HBA each for slot 2, slot 4, and slot 6
- B. one 2-port FC HBA each for slot 1 and slot 2
- C. one 2-port FC HBA for slot 1
- D. one 2-port FC HBA each for slot 1, slot 3, and slot 5
Answer: A
NEW QUESTION 26
A customer operates a data center based on third-party servers, which includes third-party storage with an iSCSI SAN.
The architect needs to design a solution that can seamlessly access the current data from a new HPE Moonshot system.
How can the HPE Moonshot system access the legacy storage?
- A. using native iSCSI initiator to connect to the storage on the management LAN
- B. using native iSCSI target software to connect to the storage on a dedicated LAN
- C. using native iSCSI initiator to connect to the storage on a dedicated LAN
- D. using an HPE Multifunction router to convert iSCSI to Virtual Connect
Answer: C
NEW QUESTION 27
A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total:
135 processors with 4 2.9GHz cares each
4. 32TB RAM
64.8TB local storage on SSDs
Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one- tenth or even one-hundredth of its potential?
- A. amount of RAM
- B. number of cores per processor
- C. amount of local storage on SSDs
- D. number of processors
Answer: C
NEW QUESTION 28
A proposed solution includes the HPE Moonshot-4QSFP+ Uplink Modules. The customer informs the architect that the planned purchase of 40GbE switches has been postponed. The customer still intends to purchase
40GbE switches within a year, but in the meantime, existing 10GbE switches will be used.
These switches are
HPE network switches located 25 meters from the location of the racks that house the HPE Moonshot Solution. The customer needs 30Gb/s bandwidth.
Which action should the architect recommend to allow the customer to deploy the solution immediately and easily take advantage of 40GbE when deployed later?
- A. Swap in HPE Moonshot-16SFP+ Uplink Modules
- B. Replace the QSFP+ transceivers with SFP+ transceivers
- C. Add QSP+/SFP+ adaptor kits to the design
- D. Replace the DAC cables with DAC splitter cables
Answer: C
NEW QUESTION 29
A customer purchases a hyperscale solution based on the HPE Moonshot platform and needs a management tool is suitable for this environment and meets the customer's needs?
- A. HPE Cloud OS for HPE Moonshot
- B. HPE OneView with HPE Operation Analytics plugin
- C. HPE Insight Cluster Management Utility
- D. HPE Helion Cloud System 9 Foundation
Answer: C
NEW QUESTION 30
An architect is designing a data center solution that contains an HPE BladeSystem for the virtual application, infrastructure, and VDI environment. It also contains an HPE Moonshot for the web servers.
In which parts of the HPE Transformation Area does this solution fit?
- A. enable and empower
- B. transform and empower
- C. empower and protect
- D. transform and protect
Answer: B
NEW QUESTION 31
A customer needs to integrate an existing incident management application with HPE OneView. The customer needs to be notified when the physical resource status changes or when a new server is added to the infrastructure.
Which HPE OneView feature should the architect recommend to the customer?
- A. additional licensed integration plugins for HPE OneView that will allow required integration
- B. HPE Cloud Optimizer for HPE OneView
- C. WBEM Subscription option that will allow data retrieval from HPE OneView
- D. RESTful API and State Change Message Bus concept
Answer: D
NEW QUESTION 32
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?
- A. Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
- B. Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.
- C. Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports.
Stack the modules in different chassis and connect just one to the management network. - D. Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
Answer: C
NEW QUESTION 33
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors.
The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo r2200
- B. HPE Apollo r2800
- C. HPE Apollo 6000
- D. HPE Apollo 8000
Answer: A
NEW QUESTION 34
An architect needs to design a solution for a customer that stores all data on third-party
NAS storage, and that does not yet have a database solution. The new HPE-based solution must be optimized for data mining.
How can the current data stored on the NAS be used for data mining?
- A. connecting the database to the NAS as main storage by using a TOE Host Bus Adapter
- B. attaching the database directly to the NAS storage by using an iSCSI Host Bus Adapter and by using the NAS for all DB tables
- C. attaching the database directly to the NAS storage by using a Fibre Channel Host Bus Adapter and by using the NAS for all DB tables
- D. using the database application import functionality to migrate the data from the NAS to block-level storage for processing
Answer: D
NEW QUESTION 35
A customer needs a live transcoding solution that meets the following requirements:
* Supports thousands of HD streams
* Provides GPU acceleration
* Provides a high density of streams per Watt and rack unit
Which solution should the architect recommend?
- A. Several HPE Apollo 6000 Systems with HPE ProLiant XL220a server nodes
- B. Several HPE Moonshot Systems with m710p cartridges
- C. Several HPE Apollo 6000 Systems with HPE ProLiant XL230a server nodes
- D. Several HPE Moonshot Systems with m700 cartridges
Answer: B
Explanation:
Explanation
NEW QUESTION 36
An architect is planning an HPE Moonshot System to host a customer Hadoop
MapReduce2 application. The architect originally proposed the following:
The customer now needs each HPE Moonshot chassis to provide at least 1TB of memory and 40TB or local storage.
Cartridge nodes needs two 10GbE ports each.
What does the architect need to replace in the solution to meet the customer's new requirements?
- A. 4-QSFP+ Uplink Modules with 16-SFP+ Uplink Modules, which provide 10GbE ports to the cartridges
- B. m710 cartridges with m710p cartridges, which support higher capacity local drives
- C. 45XGc switches with 180G switches, which provide the required two 10GbE ports to the cartridges
- D. m710 cartridges with m350 Cartridge, which provide more memory
Answer: A
NEW QUESTION 37
An architect explains a software-defined data center (SDDC) concept and its benefits to a customer. The customer indicates an interest and so the architect needs to verify whether the customer is ready to move to the SDDC.
Which additional information should the architect obtain from the customer to verily this?
- A. whether they have a disaster recovery plan implemented
- B. whether they have a workplace mobility plan implemented
- C. whether they have standardized on a single vendor
- D. whether they already virtualize compute and storage resources
Answer: D
NEW QUESTION 38
......
HPE Master ASE - Server Solutions Architect (HPE0-S22) Exam Introduction
This HPE0-S22 exam is related to HPE Master ASE - Server Solutions Architect certification. This exam validates the Candidateâs knowledge and skills of foundational server architectures and technologies, functions, features, and benefits of HPE server products and solutions, analyzing the server market and positioning HPE server solutions to customers, Planning and designing HPE server solutions.
Foundational server architectures and technologies 15%
- Explain the benefits of APIs.
- Determine optimal processors for specific use cases and operational workloads.
- Determine interconnect (networking, storage) technologies based on customer/solution requirements.
Go to HPE0-S22 Questions - Try HPE0-S22 dumps pdf : https://www.pass4leader.com/HP/HPE0-S22-exam.html