Real Exam Questions NCSC-Level-1 Dumps Exam Questions in here [Oct-2021]
Get Latest Oct-2021 Conduct effective penetration tests using NCSC-Level-1
NEW QUESTION 27
A consultant is running the Foundation VM using desktop virtualization software. No nodes are discovered.
What should the consultant verify first?
- A. Internal Network
- B. Bridged Adapter
- C. Host-only Adapter
- D. NAT
Answer: B
NEW QUESTION 28
A consultant is deploying a Nutanix cluster at a customer location. The consultant will be deploying the latest AOS along with the latest Nutanix hardware.
Which three references should the consultant review prior to this installation? (Choose three.)
- A. Release Notes
- B. End-Of-Life (EOL) Information
- C. Acropolis Advanced Administration Guide
- D. Field & Security Advisories
- E. Software Product Interoperability
Answer: A,D,E
NEW QUESTION 29
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A. Through <CVM-IP> :9443
- B. Through <cluster-IP> :8000
- C. Through <cluster-IP> :9443
- D. Through <CVM-IP> :8000
Answer: D
NEW QUESTION 30
In a 20-node ESXi deployment, the customer needs additional resiliency to survive the loss of two nodes concurrently.
Which configuration should the consultant use to ensure that the appropriate resources are available?
- A. Storage reservation for 5%; HA admission control for 5%, cluster RF2
- B. Storage reservation for 10%; HA admission control for 10%, cluster RF2
- C. Storage reservation for 10%; HA admission control for 10%, cluster RF3
- D. Storage reservation for 5%; HA admission control for 5%, cluster RF3
Answer: C
NEW QUESTION 31
A customer wants to use NIC teaming on an ESXi host using a vSphere Standard Switch configured with the Route based on physical NIC load load balancing option. The customer does not see the option when editing the Teaming and Failover settings for the switch.
How should the consultant resolve this issue?
- A. Add a vSphere Distributed Switch
- B. Install a vCenter server to manage the switch
- C. Add another physical NIC to the team.
- D. Change the load balancing option on the switch.
Answer: A
NEW QUESTION 32
Refer to the exhibit.
A system administrator is using Range-Autofill tool to assign IP addresses to setup a multi-block cluster based on the following configuration:
Which additional changes must be made during the Foundation process to configure the cluster correctly?
- A. Change IP address
- B. Change host names
- C. Reorder block serial
- D. Reorder blocks
Answer: B
NEW QUESTION 33
Where can a consultant find Nutanix Enablement Starter Packs (ESPs)?
- A. In the Services section of the Nutanix website.
- B. In the Support Portal
- C. In the Partner Portal
- D. In the Nutanix .NEXT Community Forum
Answer: C
NEW QUESTION 34
After installation, network ports are properly configured with the default active-backup bonding.
One 10GbE port goes to switch 1. Another 10GbE port goes to switch 2. A consultant tests failover by manually pulling one of the cables and notices it is taking too much time to failover, which is causing excessive packet loss.
What should the consultant enable to resolve this issue?
- A. LACP on switch
- B. PAgP
- C. Jumbo frames
- D. Portfast
Answer: D
NEW QUESTION 35
A consultant is planning an installation and needs to collect configuration items to be used during the install. The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Project Plan
- B. Questionnaire
- C. Operations Guide
- D. Technical Checklist
Answer: D
NEW QUESTION 36
A customer buys ultimate licensing and wants to use the built-in Nutanix software encryption on their new AHV cluster. The customer needs to create three storage containers and asks the consultant to complete the process as fast as possible.
In which order should the cluster be deployed?
- A. Create Cluster -> Install License Key -> Create Storage Containers -> Encrypt Cluster
- B. Create Cluster -> Create Storage Containers -> Encrypt Cluster -> Install License Key
- C. Create Cluster -> Encrypt Cluster -> Install License Key -> Create Storage Containers
- D. Create Cluster -> Install License Key -> Encrypt Cluster -> Create Storage Containers
Answer: A
NEW QUESTION 37
A consultant deploys a four-node VMware ESXi cluster and vCenter server. An HA/DRS cluster is configured for all four nodes. The customer deploys five new VMs on the cluster.
During the knowledge Transfer, a network cable on one node is removed to demonstrate HA and migration of the VMs to another host. In the HA/DRS cluster settings, the VM Restart Priority for all CVMs is set to Disabled. The customer observes warnings that the CVM on the ejected host is no longer powered on.
Which ESXi HA/DRS cluster setting is missing?
- A. Enable EVC for the cluster.
- B. Disable Automation Level on all CVMs.
- C. Disable VM Monitoring on all CVMs.
- D. Enable Host Monitoring.
Answer: B
NEW QUESTION 38
A consultant has deployed a Nutanix cluster with AOS 5.10.x, then discovers the customer's environment is running on AOS 5.6.x. The consultant decides to re-image the cluster using the foundation Java applet. During the Foundation discovery, all cluster nodes display a status of Unavailable.
What should the consultant do to resolve the issue?
- A. Reset the IPMI IP addresses.
- B. Use the Phoenix ISO
- C. Destroy the cluster.
- D. Restart the Genesis service on the cluster.
Answer: C
NEW QUESTION 39
After imaging the nodes and creating the cluster successfully, the consultant connects the cluster to the customer network. When logging into Prism, the events dashboard is full of errors.
What is causing the issue?
- A. Foundation did not create the cluster successfully.
- B. The consultant did not run Nutanix Cluster Check (NCC..
- C. The cluster was not stopped prior to connecting to the customer network.
- D. The Cluster Virtual IP Address (VIP) was not set up during the process.
Answer: C
NEW QUESTION 40
A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)
- A. vShpere DRS
- B. vSphere Power Management
- C. vSphere vMotion
- D. vSphere HA
Answer: A,D
NEW QUESTION 41
A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?
- A. Route based on originating port ID
- B. Route based on source MAC hash
- C. Route based on physical NIC load
- D. Route based on IP hash
Answer: A
NEW QUESTION 42
During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?
- A. first_boot.log
- B. genesis.out
- C. foundation.out
- D. service.log
Answer: D
NEW QUESTION 43
A customer is running out of storage in an ESXi cluster. The customer wants to add storage without paying for an additional hypervisor license.
Which option should the consultant recommend to meet the requirement?
- A. Buy a new node to meet the requirements of the storage-only node specifications.
- B. Edit the factory_config.json file to configure the node as storage-only and then expand the cluster in Prism
- C. Select the storage-only checkbox during Foundation and then expand the cluster in Prism.
- D. Convert the cluster to AHV to support storage-only node requirements.
Answer: A
NEW QUESTION 44
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Open terminal and configure via ifconfig command.
- B. Configure the static IP address through the desktop virtualization software.
- C. Ensure the vNIC is set to bridged adapter.
- D. Run the set_foundation_ip_address application on the VM desktop.
Answer: C,D
NEW QUESTION 45
For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?
- A. ovs-vsctl set port br0-up bond_mode=active-backup
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000 - B. ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true
ovs-vsctl set port br0-up lacp=active
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. ovs-vsctl set port br0-up bond_mode=balance-slb
- D. ovs-vsctl set port br0-up bond_mode=balance-slb
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
ovs-vsctl set port br0 tag=10
Answer: D
NEW QUESTION 46
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
- A. Use crash cart and manually upgrade Foundation files on one node.
- B. Use the Foundation VM to upgrade Foundation on all nodes.
- C. Use the Foundation Applet to upgrade Foundation on a single node.
- D. Use latest version of Foundation to reimage all the nodes.
Answer: C
NEW QUESTION 47
......
Authentic Best resources for NCSC-Level-1 Online Practice Exam: https://www.pass4leader.com/Nutanix/NCSC-Level-1-exam.html