Get 2021 Updated Free Network Appliance NS0-176 Exam Questions & Answer
NS0-176 Dumps PDF and Test Engine Exam Questions
NetApp NS0-176 Exam Certification Details:
| Exam Price | $150 USD |
| Exam Code | NS0-176 FlexPod |
| Exam Registration | PEARSON VUE |
| Duration | 60 minutes |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Number of Questions | 60 |
| Passing Score | 68% |
| Sample Questions | NetApp NS0-176 Sample Questions |
NEW QUESTION 57
Exhibit:
Your customer has a FlexPod VMware solution deployed with NFS datastores. As shown in the exhibit, the links between the Fabric Interconnects and storage controllers are single-mode interface groups with autorevert set to true, hosting a single access LIF. NFS I/O is currently going through fabric A to ST-A. The customer wants to use both fabrics for NFS I/O.
In this scenario, what will accomplish this task?
- A. Migrate the existing LIF that is used for NFS I/O on ST-A to its HA partner ST-B.
- B. Configure VMware hosts to utilize an NFS LIF on ST-B that is connected to fabric A.
- C. Configure VMware hosts to use a new datastore with an NFS LIF on ST-B connected to fabric B.
- D. Add two physical links between SW-A and SW-B.
Answer: C
NEW QUESTION 58
Which sends support summary information to NetApp through HTTPS?
- A. AutoSupport
- B. SnapSupport
- C. TechSupport
- D. FlexSupport
Answer: A
NEW QUESTION 59
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?
- A. OnCommand Insight
- B. UCS Director
- C. OnCommand System Manager
- D. UCS Manager
Answer: B
NEW QUESTION 60
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Network
- B. Edge
- C. Edge trunk
- D. Normal
- E. Trunk
Answer: C
NEW QUESTION 61
A Cisco UCS system is operating in FC End-Host Mode. The fabric Interconnects are uplinked into Nexus 5672UP switches using native FC. The service profiles are unable to boot from SAN using FC.
When executing the show flogi database command on the Nexus switches, only the Fabric Interconnect port WWNs are visible. No service profile WWNs are shown.
What caused this issue?
- A. The zoning on the Nexus switches is incorrect.
- B. The Nexus switches do not have NPIV enabled.
- C. The Nexus must be configured for FCoE instead of native Fibre Channel.
- D. The Nexus switches do not have NPV enabled.
Answer: B
NEW QUESTION 62
Which three are characteristics of a NAS data LIF? (Choose three.)
- A. It can be associated with an Ethernet port or VLAN interface.
- B. It can be associated with a WWPN
- C. It can be associated with an IP address.
- D. It is associated with the administrative Vserver.
- E. It can be associated with an interface group (ifgrp).
- F. It can be associated with a Fibre Channel port.
- G. It is associated with the management LIF.
Answer: A,C,E
NEW QUESTION 63
Which two NetApp storage solutions are supported in FlexPod solutions? (Choose two.)
- A. ONTAP Select
- B. NetApp E-Series
- C. NetApp AFF
- D. NetApp Storage GRID
Answer: B,C
NEW QUESTION 64
Your customer needs a new Nexus switch that can support at least ten 40GbE ports, and has room for future growth. Your customer would also like the new switch to be Application Centric Infrastructure- ready.
Which switch meets these requirements?
- A. Nexus 6004
- B. Nexus 7004
- C. Nexus 9504
- D. Nexus 5672
Answer: C
NEW QUESTION 65
Which LIF role is used for SnapMirror traffic on a system running clustered Data ONTAP?
- A. intercluster
- B. interconnect
- C. node-management
- D. cluster-management
Answer: A
NEW QUESTION 66
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task? (Choose two.)
- A. Cisco MDS 9250i
- B. Cisco Catalyst 6504
- C. Cisco Nexus 9396PX
- D. Cisco Catalyst 9300-48P
Answer: A,C
NEW QUESTION 67
Which four items are required in order to create a Gold Master Boot LUN to automate the provisioning of Hyper-V hosts using the built-in LUN cloning capabilities of NetApp storage? (Choose four.)
- A. Creation of a service profile and zoning for Gold Master Boot LUN
- B. SysPrep of the server operating system
- C. Create additional virtual fibre channel (vfc) interfaces for the Nexus 5500
- D. Configuration of the Server OS and hotfix installation
- E. Create a new interface group on the NetApp Cluster
- F. Creation of a LUN for the Gold Master Boot LUN
Answer: A,B,D,F
NEW QUESTION 68
When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?
- A. Full Provision
- B. Thin Provision
- C. Thick Provision Lazy Zeroed
- D. Thick Provision Eager Zeroed
Answer: D
NEW QUESTION 69
An administrator has a FlexPod solution for use with a VMware vSphere 6.0 environment. The virtual environment consists of virtual machines running both Windows Server 2012 R2 and Windows Server 2008.
The administrator determines that the Windows Server 2008 virtual machine VMDKs are misaligned. The problem needs to be solved without incurring downtime on the virtual machines.
Which tool enables the administrator to solve the problem without virtual machine downtime?
- A. UCS Central
- B. VMware vRealize Operations
- C. NetApp mbralign toolkit
- D. NetApp Virtual Storage Console
Answer: C
NEW QUESTION 70
You are asked to increase read performance for a single aggregate; however, there are no PCI-e slots available in the NetApp cluster nodes.
In this scenario, which feature meets these requirements?
- A. Advanced Drive Partitioning
- B. Flash Cache
- C. Thin Provisioning
- D. Flash pool
Answer: D
NEW QUESTION 71
Your customer has the storage configuration for a FlexPod solution shown below.
- FAS8040 HA-pair
- Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives)
- Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives)
- There are no unused SAS ports on either controller
- There are no expansion slots available on either controller
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives.
In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).
- A. Cable the new shelf to the end of stack one.
- B. Cable a new stack for the SSD shelf.
- C. Cable the new shelf to the beginning of stack two.
- D. Cable the new shelf to the end of stack two.
Answer: B,C
NEW QUESTION 72
How many cluster interconnect switch(es) are required for a 4-node NetApp cluster?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: C
NEW QUESTION 73
Which feature allows Cisco Nexus 7000 Series switches to be virtualized at the device level?
- A. VRF
- B. PONG
- C. VDC
- D. VLAN
Answer: C
NEW QUESTION 74
A server administrator calls you complaining that an uplink on both UCS Fabric Interconnects went down. Each Fabric Interconnect has a vPC to the Nexus 500 switches.
After logging in to the switches, you notice that all vPC member ports on the secondary vPC peer switch are down. The vPC peer keepalive is still operational.
What is the problem in this scenario?
- A. The vPC peer link is down.
- B. The vPC feature is disabled.
- C. Both UCS Fabric Interconnects rebooted.
- D. A new VLAN was added to the UCS vPC member ports.
Answer: A
NEW QUESTION 75
Which management tool is used to configure and monitor centralized policies for multiple Cisco UCS domains?
- A. UCS Director
- B. UCS Performance Manager
- C. UCS Central
- D. UCS Manager
Answer: C
NEW QUESTION 76
How do the Fabric Interconnect ports connecting to the 2232PP FEX have to be configured?
- A. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Server'
- B. In UCS Manager, the FI ports connecting to the FEX must be set as type 'FEX'
- C. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Uplink'
- D. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Network'
- E. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Auto'
Answer: A
NEW QUESTION 77
After deploying a FlexPod solution, which tool would you use to validate a successful installation?
- A. Hardware Universe
- B. Config Advisor
- C. UCS Manager
- D. System Manager
Answer: B
NEW QUESTION 78
......
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
| FlexPod Administration | - Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices - Describe FlexPod management applications - Demonstrate knowledge of how to install and upgrade the FlexPod solution |
Verified NS0-176 exam dumps Q&As with Correct 141 Questions and Answers: https://www.pass4leader.com/NetworkAppliance/NS0-176-exam.html