Free IBM P6040-014 Practice Test & Real Exam Questions

Exam Code/Number: P6040-014
Exam Name/Title: IBM SurePOS 500 Models 5x5 Technical Mastery
Certification Provider: IBM
Corresponding Certification: IBM Mastery

Exam Questions: 65
Updated On: Aug 31, 2026

Question #1

Which three processor characteristics are found in the IBM SurePOS 5x5 series? (Choose three.)

A. It does not support multi-media applications.

B. It is non-socketed.

C. It operates at 2.53GHz.

D. It has an Integrated Graphics Processor.

E. It has a 533MHz frontside bus.

F. It has an Intel chipset.

Discussion 0

Correct Answer: C,E,F Vote an answer

Question #2

What is one of the differences between IBM SurePOS Model 545 and Model 565?

A. Model 545 has only one USB port on the display; the 565 has three USB ports on the display.

B. Model 545 has 512MB of memory standard; the 565 has 1GB of memory standard.

C. Model 545does not have a PC Card slot; the 565 does have a PC Card slot.

D. Model 545 has a 20GB SATA II hard disk drive; the 565 has an 80GB SATA II hard disk drive.

Discussion 0

Correct Answer: C Vote an answer

Question #3

What are three applicable precautionary steps to handling static-sensitive components? (Choose three.)

A. wear rubber gloves to reduce static electricity and prevent cuts from the sharp edges

B. lessen the amount of static electricity by limiting the amount of movement

C. when putting down static-sensitive components, do so on top of an anti-static bag, not on the system cover or metal table

D. once the component is removed from the anti-static bag, install it immediately

E. stand with at least one foot on ananti-static mat when installing printed circuit boards

F. keep one finger on the metal frame at all times

Discussion 0

Correct Answer: B,C,D Vote an answer

Question #4

What is the easiest way to install the latest BIOS version?

A. boot from the IBM Diagnostics for POS Systems and Peripherals and run the BIOS update utility

B. run the Setup Utility and select Update BIOS

C. load it from a USB attached floppy drive containing a diskette with the latest BIOS on it

D. attach the IBM SurePOS 5x5 to the Internet and download the BIOS version from the
IBM Retail Store Solutions Web site

Discussion 0

Correct Answer: C Vote an answer

Question #5

In order to preventelectrostatic discharge (ESD) damage when removing or replacing parts in the IBM SurePOS 5x5, which preliminary step should be taken before opening the device?

A. connect an ESD wrist strap and cord

B. remove wool clothing to reduce ESD

C. stand on an ESD treated rubber mat

D. wear rubber gloves to reduce ESD

Discussion 0

Correct Answer: A Vote an answer

Question #6

What does the firstpart of the procedure for resetting CMOS involve?

A. repositioning J25 jumper pins from pins 1 and 2 to pins 2 and 3 for a five second interval; returning the pins to their original positions

B. removing all jumper pins from location J25; waiting 15 seconds; returning them to the original position

C. removing both the backup battery and the pins from location J25 for one minute; returning both to the original position

D. removing the backup battery for one minute; then returning it to the original position

Discussion 0

Correct Answer: A Vote an answer

Question #7

What is the starting point for diagnosing a problematic IBM SurePOS 5x5?

A. power on the system; pay particular attention to POST; make sure to observe the LED blinking and one beep beforethe system powers up

B. refer to the start up sequence listed in the User's Guide; power on and note any differences

C. attach a USB CD drive containing the IBM Diagnostics for POS Systems and Peripherals; power on the system; follow any corrective action

D. with the systemoff, reseat the DIMMs; power on the system

Discussion 0

Correct Answer: A Vote an answer

Download Free IBM P6040-014 Demo

Simply submit your e-mail address below to get started with our free demo of your IBM P6040-014 exam.