Free Cisco 350-601 Practice Test & Real Exam Questions

What occurs during a scheduled electronic programmable logic device (EPLD) update of a Cisco fabric switch supervisor module?

An engineer configured an environment that contains the vPCand non-vPC switches, however, it was noticed that the downstream non-vPC switches do not receives the same STP bridge ID from the upstream which vPC feature must be implemented to ensure must be implemented to ensure that vPC and non-vPC switches receive the same STP bridge ID from the upstream vPC switch peers?

An engineer must integrate VMware vCenter with the Cisco ACI fabric and allow the network layer to be extended in the virtual domain. The VMware environment has these attributes:
VMware vCenter 7.0
vPC must connect to the leafs
DVS 6.6
Which policy must the engineer configure to meet the requirements of the virtual domain?

Refer to the exhibit. A Cisco data center environment is implemented with vPC. The web server replies using the SVI MAC address as the Layer 2 header instead of the HSRP MAC address on VLAN 23. This behavior causes packet drops on the Cisco Nexus 9000 Series Switches due to the vPC loop prevention mechanism. The requirement is for the vPC feature to allow N9K_1 and N9K_2 to forward traffic between the NAS server and the web server, even if the HSRP's MAC address is not used on Layer 2 headers for VLAN 23. Which feature must be used to accomplish this goal?

Refer to the exhibit. An engineer must implement an Application Performance Monitoring (APM) for the production servers on the Cisco Nexus 93180 Series Switch-based infrastructure in datacenter 1. The APM solution must meet these requirements:
- It must copy all inbound and outbound production traffic.
- It must support real-time telemetry.
Which configuration must be used on datacenter 1 switches to meet these objectives?

An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
- vNIC and vHBA profiles
- Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)

An engineer must create a scheduler configuration to create two backup jobs per day.
The backup file must be copied to a server in the operations VRF.
Which configuration accomplishes this task?

A network administrator is using the Cisco ESA with Cisco AMP to upload files to the cloud for analysis.
The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?

What is required for using Puppet in a Cisco NX-OS environment?

Refer to the exhibit. An engineer must create a scheduler task on a Cisco Nexus 9000 Series Switch at 06:00 AM. The task must save the running configuration to a file in the bootflash, then transfer the file from the bootflash to a TFTP server. Which command must the scheduler task run after the running configuration is copied to the bootflash?

What is the impact of performing an electronic programmable logic device upgrade on a single module in a Cisco MDS 9000 Series Fabric Switch?

Refer to the exhibit. The network 10.1.1.15/32 is advertised to N9K1. N9K2 and N9K3 OSPF neighbors in area 1. Which configuration advertises network 10.1.1.15/32 as LSA type 7 to N9K3?

Refer to the exhibit. Which port type must be used to complete the configuration of a monitoring session that sends traffic to a monitoring device?

Refer to the exhibit. A Cisco Nexus Dashboard Fabric Controller (NDFC) manages the LAN network using the interface mgmt0. The management interface of the Nexus Dashboard is Layer
2 adjacent to the mgmt0 interface of the Nexus 9000 Series Switch. Which IP address must be allocated to the mgmt0 interface of the NDFC to manage the LAN network?