Free Cisco 350-601 Practice Test & Real Exam Questions, Page 2

Question #15

An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B. The vPCs are deployed as follows:
- vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to
server 1.
- vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server
2.
A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?

A. one access port interface policy group

B. two PortChannel interface policy groups

C. two vPC interface policy groups

D. one vPC interface policy group

Discussion 0

Correct Answer: C Vote an answer

Question #16

Refer to the exhibit. The STP priority of N7K-1 and N7K-2 are the lowest in the network.

Which statement describes STP on the vPC?

A. N7K-1 and N7K-2 appear as a single STP root.

B. N7K-1 appears as the STP root.

C. N7K-1 preempts N7K-2 as the STP root.

D. N7K-2 appears as the STP root.

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #17

An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS
9000 Series Switch.
Which action enables fabric redundancy?

A. Configure the NPV devices to use an external FLOGI database.

B. Use TE ports to connect to upstream switches.

C. Connect the NPV devices to multiple upstream switches.

D. Add a port channel to upstream switches.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #18

What is the impact of upgrading the firmware of the Cisco UCS Manager?

A. The connected user is logged out and the session is ended.

B. The connectivity to the fabric interconnects using RDP is unavailable.

C. The UDP packets destined for the primary fabric interconnect are dropped.

D. Fault suppression is triggered when the upgrade process starts.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #19

A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion.
What is a requirement for both physical hosts?

A. The hosts must use a different datastore than the virtual appliance

B. The hosts must run different versions of Cisco AsyncOS.

C. The hosts must run Cisco AsyncOS 10.0 or greater.

D. The hosts must have access to the same defined network.

Discussion 0

Correct Answer: D Vote an answer

Question #20

Refer to the exhibit. Which statement about the default gateway configuration of the vPC is true?

A. Either switch can act as the active default gateway.

B. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.

C. N7K-2 acts as the default gateway for all traffic.

D. N7K-1 acts as the default gateway for all traffic.

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #21

An engineer needs to implement a solution that will provide telemetry of MDS 9000 switches in a SAN fabric. The solution should use Cisco Data Center Network Manager (DCNIM) with SAN insights feature. Which three steps are required to deploy the solution? (Choose Three.)

A. Select a target Fabric to be monitored.

B. Select a target VSAN to be monitored

C. Select the target ports to be monitored for telemetry data

D. Configure name resolution between the devices

E. Activate SAN_ANALYTICS_PKG license on target switches

F. Activate ENTERPRISE_PKG license on target switches

Discussion 0

Correct Answer: A,C,E Vote an answer

Question #22

An engineer must create an EPG called "Test". The configuration request should succeed if the Tenant called "Tenant" and the application profile called "Test" exist. The firewall policy allows only the HTTP connectivity to APIC from the user's computer. Which action accomplishes this goal?

A. Send <fvAEPg dn="uni/tn-Test//ap-Test//epg-Tenant" status="created"/> to APIC payload using HTTP PUT to the Cisco APIC.

B. Send <fvAEPg dn="uni/tn-Test/ap-Test/epg-Tenant" status="created"/> to APIC payload using HTTP POST to the Cisco APIC.

C. Send <fvAEPg dn="uni/tn-Tenant/ap-Test/epg-Test" status="created"/> to APIC payload using HTTP POST to the Cisco APIC.

D. Send <fvAEPg dn="uni/tn-Tenant//epg-Test//ap-Test" status="created"/> to APIC payload using HTTP PUT to the Cisco APIC.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #23

A new user with access privileges in the Finance department moves to a new Admin department.
The user must have access privileges to the Admin department data and applications inside the Cisco UCS Manager.
Which set of changes must be implemented in Cisco UCS Central for the user to acquire the privileges?

A. Create an Admin user account and remove the authentication service for the Finance privileges.

B. Create a new locale Admin and add the Admin department to the Admin locale. Delete the old locale

C. Disable the Finance user account and add the authentication service for the Admin privileges.

D. Finance and remove the Finance department from the Finance locale.

Discussion 0

Correct Answer: B Vote an answer

Question #24

Which Cisco solution provides SAN slow-drain analysis?

A. Cisco UCS Central

B. Cisco Nexus Dashboard

C. Cisco UCS Director

D. Cisco Intersight

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #25

A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions. The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities. Which solution provides this information?

A. Cisco Intersight with Slow Drain Analysis

B. Cisco DCNM with SAN Insight

C. SolarWinds with Slow Drain Analysis

D. Nagios Core with OpManager

Discussion 0

Correct Answer: B Vote an answer

Question #26

Refer to the exhibit. A VXLAN data center fabric consists of three hosts mapped to different VLANs. Ingress VTEPs perform Layer 2 bridging and Layer 3 routing. Egress VTEPs only perform a Layer 2 bridging lookup. Which VNI values must be set to allow inter-VNI communication?

A. VLAN 100 to Layer 2 VNI 2020
Test_Telco_VRF to Layer 3 VNI 1010

B. VLAN 100 to Layer 2 VNI 2020
Test_Telco_VRF to Layer 3 VNI 5050

C. VLAN 100 to Layer 2 VNI 1010
VLAN 200 to Layer 2 VNI 1010

D. VLAN 100 to Layer 2 VNI 2020
VLAN 200 to Layer 2 VNI 5050

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #27

Refer to the exhibit. An engineer implements an FCoE Unified Fabric where vPC exists between N9K-A and N9K-B. To avoid rate discards, bandwidth must be regulated to account for sent traffic that exceeds the access speed.

Which set of commands completes the configuration?

A. fcoe fcf-priority 255 on N9K-A
police 50000
spanning-tree port type edge trunk on Po1

B. fcoe fcf-priority 0 on N9K-A
hardware qos fc rate-shaper low
spanning-tree port type edge trunk on Po10

C. fcoe cost 255 on N9K-A
random-detect min 10 max 20
spanning-tree port type edge on Po10

D. fcoe cost 0 on N9K-A
shape min 0 gbps max 1 gbps
spanning-tree port type edge on Po1

Discussion 0

Correct Answer: B Vote an answer

Question #28

An engineer must send JSON encoded telemetry data to an external collector.
The transport mechanism must prevent tampenng or forgery of the data.
Which protocol accomplishes this goal?

A. gRPC

B. DTLS

C. GPB

D. HTTP

Discussion 0

Correct Answer: B Vote an answer

Free Cisco 350-601 Practice Test & Real Exam Questions

Download Free Cisco 350-601 Demo