Free Sample Questions to Practice D-PSC-MN-23 Certification Test Engine [Apr-2025]
2025 Valid D-PSC-MN-23 Real Exam Questions, practice Dell Storage
NEW QUESTION # 39
Which network configurations are valid on a Dell PowerScale Gen 6 cluster that uses an Ethernet backend?
- A. IPv6 addressing only, 1500 MTU, and 48-bit subnet mask
- B. IPv4 addressing only, 1500 MTU, and 48-bit subnet mask
- C. IPv4 or IPv6 addressing, 1500 MTU, and 24-bit subnet mask
- D. IPv4 addressing only, 9000 MTU, and 24-bit subnet mask
Answer: D
NEW QUESTION # 40
What is the recommended way to install a Dell PowerScale Gen 6 compute module in a chassis?
- A. Slide the release lever to the right and guide the node into the chassis.
- B. Close the module lever and slide the module into the chassis until it clicks.
- C. Support the node with both hands and slide it into the node bay.
- D. Loosen the thumbscrew on the release lever then slide the compute module into the chassis.
Answer: C
NEW QUESTION # 41
How does the Serial Console differ from the WebUI in managing PowerScale clusters?
- A. It provides a text-based interface.
- B. Both A and B
- C. It requires physical access to the node.
- D. It offers a more detailed system view.
Answer: B
NEW QUESTION # 42
When should the customer engineer document and register a Dell PowerScale system in the install base record?
- A. After OneFS has been initialized and configured
- B. Before racking the system
- C. Before OneFS has been initialized, configured, and updated
- D. After racking the system
Answer: D
NEW QUESTION # 43
A platform engineer plans to upgrade Dell PowerScale OneFS.
Which action must they consider during the pre-upgrade phase?
- A. Implement OneFS API
- B. Check supportability and compatibility requirements
- C. Install recommended patches
- D. Update firmware
Answer: D
NEW QUESTION # 44
A platform engineer is installing a Dell PowerScale cluster with 12 F200 nodes. They are using breakout cables.
What is the speed of the back-end port of the nodes if the switchport is 100 GbE?
- A. 10 GbE
- B. 50 GbE
- C. 25 GbE
- D. 12.5 GbE
Answer: C
NEW QUESTION # 45
What does the process of smartfailing a node involve?
- A. Updating the cluster configuration database
- B. Transferring data to other nodes in the cluster
- C. Temporarily removing the node from service
- D. Physically replacing the node hardware
Answer: C
NEW QUESTION # 46
How do you ensure data continuity during a PowerScale node hardware upgrade?
- A. Use data mirroring to an external backup cluster
- B. Isolate the node being upgraded from the network
- C. Synchronize all nodes before starting the upgrade
- D. Implement rolling upgrades across the cluster
Answer: D
NEW QUESTION # 47
Which tools or methods are critical for ensuring compliance and integrating SRS within a PowerScale cluster configuration? (Select two)
- A. SyncIQ for data replication
- B. Security and Compliance Suite
- C. InsightIQ for performance monitoring
- D. SRS for remote support
Answer: B,D
NEW QUESTION # 48
A platform engineer needs to replace the fan on Dell PowerScale Gen 6 hardware.
Where can they find the fan module?
- A. Front panel
- B. Suitcase
- C. Midplane
- D. Compute module
Answer: D
NEW QUESTION # 49
In the context of PowerScale, what is the primary function of the PAPI tool?
- A. To facilitate network configuration
- B. To assist in hardware diagnostics
- C. To provide physical console access
- D. To enable programmatic cluster management
Answer: D
NEW QUESTION # 50
When reimaging a node in the context of PowerScale, what is the primary goal?
- A. To install a new operating system version
- B. To ensure the node's firmware is up to date
- C. To restore the node's original factory settings
- D. To update the node's BIOS settings
Answer: A
NEW QUESTION # 51
How should a PowerScale administrator approach the integration of a Hadoop ecosystem?
- A. By ensuring that the HDFS protocol is correctly configured on all nodes
- B. By creating separate storage pools for Hadoop and non-Hadoop data
- C. By installing the Hadoop software on each node individually
- D. By configuring the firewall to allow Hadoop-related traffic
Answer: A
NEW QUESTION # 52
What is the first step in planning the installation of a PowerScale cluster?
- A. Assessing the physical environment for suitability
- B. Determining the optimal operating system version
- C. Calculating the total power consumption
- D. Designing the network topology
Answer: A
NEW QUESTION # 53
In PowerScale hardware maintenance, why is it essential to track the installation and maintenance of FRUs?
- A. To maintain a detailed inventory for audit purposes
- B. To ensure optimal data placement within the cluster
- C. To facilitate future software upgrades
- D. To provide a history for troubleshooting and diagnostics
Answer: A
NEW QUESTION # 54
What is the primary purpose of conducting a PowerScale node health check before maintenance?
- A. To verify network connectivity
- B. To ensure data replication is complete
- C. To assess storage capacity utilization
- D. To identify any failing components
Answer: D
NEW QUESTION # 55
How should a technician proceed after installing a new FRU in a PowerScale node?
- A. Validate the FRU through the cluster's management interface
- B. Notify all users about the maintenance completion
- C. Perform a node reboot to integrate the FRU
- D. Conduct a benchmark performance test
Answer: A
NEW QUESTION # 56
A federal customer wants to fully restrict the ability to access and modify data on a new Dell PowerScale cluster.
How should the cluster be deployed?
- A. Enterprise mode; not connected to SRS gateway
- B. Enterprise mode; connected to SRS gateway
- C. Compliance mode; connected to SRS gateway
- D. Compliance mode; not connected to SRS gateway
Answer: D
NEW QUESTION # 57
According to Dell PowerScale best practices, which component may be replaced by the customer?
- A. Battery
- B. Power supply
- C. Fan
- D. M.2 vault card
Answer: B
NEW QUESTION # 58
Why is it necessary to verify the cluster's health status before performing any hardware maintenance?
- A. To ensure no other maintenance tasks are ongoing
- B. To prevent additional strain on the cluster
- C. To ensure accurate hardware fault diagnosis
- D. To confirm there is no data loss risk
Answer: C
NEW QUESTION # 59
What are the necessary requirements for node class compatibility when adding new nodes to an existing cluster?
- A. Same OneFS version above 9.0, same back-end NIC port speed, same SED, and SSD security settings
- B. Same node series, same amount of memory installed, and same back-end NIC port speed
- C. Same node series, same number of HDDs, same HDD and SSD layout
- D. Same number of HDDs, same node model, same OneFS version above 9.0
Answer: C
NEW QUESTION # 60
......
Genuine D-PSC-MN-23 Exam Dumps Free Demo Valid QA's: https://www.pass4leader.com/EMC/D-PSC-MN-23-exam.html
Latest Success Metrics For Actual D-PSC-MN-23 Exam (Updated 142 Questions): https://drive.google.com/open?id=1qgnbKTZk12mSLBaUoFB2k3pNqe9Pxf0Y