[Oct-2023] 300-730 PDF Dumps Are Helpful To produce Your Dreams Correct QA's
New 300-730 exam Free Sample Questions to Practice
Besides benefiting from skills you acquire during training, the course also provides a chance to gain 40 CE units, which are used for recertification. Once you have completed it, you will know that you are exam ready and you are able to meet the following objectives:
- You can make use of options for remote access VPNs on Cisco router in addition to firewalls
- You have a thorough knowledge of the site-to-site as well as remote access VPN designs
- You can use the site-to-site VPN options that are present on Cisco router as well as firewalls
- You can troubleshoot varied VPN options present on a router as well as firewalls for Cisco
Once you feel your understanding of the above areas is deep, you can proceed to taking 300-730 exam. However, not all this knowledge can be gained from one source. It is important to complement the course with other relevant study materials like study guides.
NEW QUESTION # 69
What is a requirement for smart tunnels to function properly?
- A. Stateful failover must not be configured.
- B. Applications must be UDP.
- C. Java or ActiveX must be enabled on the client machine.
- D. The user on the client machine must have admin access.
Answer: C
NEW QUESTION # 70
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-upgrade
- B. auto-run
- C. auto-start
- D. auto-connect
Answer: C
NEW QUESTION # 71
Cisco AnyConnect clients need to transfer large files over the VPN sessions. Which protocol provides the best throughput?
- A. SSL/TLS
- B. IPsec IKEv1
- C. L2TP
- D. DTLS
Answer: D
NEW QUESTION # 72
Refer to the exhibit.
A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?
- A. Enable clientless protocol under the group policy.
- B. Enable client services on the outside interface.
- C. Enable auto sign-on for the user's IP address.
- D. Enable DTLS under the group policy.
Answer: A
NEW QUESTION # 73 
Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. An authentication failure occurs on the remote peer.
- B. An authentication failure occurs on the router.
- C. UDP 4500 traffic from the peer does not reach the router.
- D. A certificate fragmentation issue occurs between both sides.
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION # 74
Which two statements about the Cisco ASA Clientless SSL VPN solution are true? (Choose two.)
- A. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the ASA uses its configured DNS servers to perform FQDN resolution.
- B. A Cisco ASA can simultaneously allow Clientless SSL VPN sessions and AnyConnect client sessions.
- C. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the client uses the local DNS to perform FQDN resolution.
- D. The rewriter enable command under the global webvpn configuration enables the rewriter functionality because that feature is disabled by default.
- E. Clientless SSLVPN provides Layer 3 connectivity into the secured network.
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa72/configuration/guide/conf_gd/webvpn.html
NEW QUESTION # 75
Refer to the exhibit.
Which two conclusions should be drawn from the DMVPN phase 2 configuration? (Choose two.)
- A. Next-hop-self is required.
- B. EIGRP is used as the dynamic routing protocol.
- C. Spoke-to-spoke communication is allowed.
- D. EIGRP route redistribution is not allowed.
- E. EIGRP neighbor adjacency will fail.
Answer: B,C
NEW QUESTION # 76
What are two purposes of the key server in Cisco IOS GETVPN? (Choose two.)
- A. to distribute routing information
- B. to authenticate group members
- C. to download encryption keys
- D. to encrypt data traffic
- E. to maintain encryption policies
Answer: B,E
NEW QUESTION # 77
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?
- A. AnyConnect images must be uploaded to both failover ASA devices.
- B. AnyConnect client must point to the standby IP address.
- C. The vpnsession-db must be cleared manually.
- D. Configure a backup server in the XML profile.
Answer: A
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ ha_active_standby.html
NEW QUESTION # 78
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. EAP-AnyConnect
- B. AnyConnect profile
- C. use of certificates instead of username and password
- D. EAP query-identity
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2-Remote-Access.pdf
NEW QUESTION # 79
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?
- A. Basic Host Scan
- B. Advanced Endpoint Assessment
- C. Cisco Secure Desktop
- D. Endpoint Assessment
Answer: B
NEW QUESTION # 80
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Same-security-traffic permit inter-interface under Group Policy
- B. Tunnel All Networks under Group Policy
- C. Exclude Network List Below under Group Policy
- D. Tunnel Network List Below under Group Policy
Answer: D
NEW QUESTION # 81
Which VPN does VPN load balancing on the ASA support?
- A. Cisco AnyConnect
- B. IPsec site-to-site tunnels
- C. L2TP over IPsec
- D. VTI
Answer: A
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 82
Refer to the exhibit.
DMVPN spoke-to-spoke traffic works, but it passes through the hub, and never sends direct spoke-to-spoke traffic. Based on the tunnel interface configuration shown, what must be configured on the hub to solve the issue?
- A. Enable IP redirects.
- B. Enable NHRP redirect.
- C. Enable split horizon.
- D. Enable NHRP shortcut.
Answer: B
NEW QUESTION # 83
Refer to the exhibit.
A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?
- A. Enable clientless protocol under the group policy.
- B. Enable client services on the outside interface.
- C. Enable auto sign-on for the user's IP address.
- D. Enable DTLS under the group policy.
Answer: A
NEW QUESTION # 84
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?
- A. ip nhrp redirect
- B. interface tunnel
- C. interface virtual-template
- D. interface virtual-access
Answer: C
Explanation:
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, the command that is needed for the hub to be able to terminate FlexVPN tunnels is interface virtual-template. The interface virtual-template command is used to configure a virtual template interface which provides a secure tunnel for FlexVPN connections. The other commands listed - interface virtual-access, ip nhrp redirect, and interface tunnel - are not related to FlexVPN and are not used to terminate FlexVPN tunnels.
NEW QUESTION # 85
......
Cisco 300-730 exam covers a wide range of topics related to VPN implementation, including VPN technologies, secure communication protocols, encryption, authentication, and network security policies. Candidates are required to have a solid understanding of VPN deployment models, such as site-to-site, remote access, and clientless VPNs. They must also demonstrate their ability to troubleshoot VPN connectivity issues and configure VPN security policies to meet the specific needs of their organizations.
Cover 300-730 Exam Questions Make Sure You 100% Pass: https://www.pass4leader.com/Cisco/300-730-exam.html
300-730 dumps Accurate Questions and Answers with Free: https://drive.google.com/open?id=1r-aYINwZAn6D4xgAv2D2SiSyHE7GWxaj