[Jan 24, 2022] Pass NS0-592 Review Guide, Reliable NS0-592 Test Engine
NS0-592 Test Engine Practice Test Questions, Exam Dumps
NetApp NS0-592 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Name | Support Engineer ONTAP Specialist |
| Number of Questions | 60 |
| Exam Price | $150 USD |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Sample Questions | NetApp NS0-592 Sample Questions |
| Passing Score | 62% |
| Duration | 120 minutes |
| Exam Code | NS0-592 NCSE ONTAP |
Network Appliance NS0-592 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 29
A reboot was performed by a watchdog reset on the node.
In this scenario, which statement is true?
- A. The service processor no longer responds.
- B. The wafl_check command should be executed.
- C. In case of an L2 watchdog event, determine whether a core was dumped.
- D. In case of an L1 watchdog event, determine whether a panic message was recorded.
Answer: A
NEW QUESTION 30
When you issue a volume clone create command, which entity in WAFL is copied?
- A. the buftree
- B. the data block
- C. the inode file
- D. the vol_info block
Answer: C
NEW QUESTION 31
In a 4-node MetroCluster cluster, both clusters are alerting that the connection to an ATTO bridge is lost.
Which three components should be verified to determine what is causing this problem? (Choose three.)
- A. the dark fiber cables between sites
- B. the ATTO bridge
- C. the fiber cable that is connecting the ATTO bridge to the switch
- D. the SFPs in the storage controllers
- E. the SFPs that are connecting the ATTO bridge to the switch
Answer: B,C,E
NEW QUESTION 32
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer's request?
- A. OneCollect
- B. perfstat
- C. Performance Archive
- D. perfmon
Answer: A
NEW QUESTION 33
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf's disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?
- A. The ACP is cabled incorrectly.
- B. There is failed IOM module in the new shelf.
- C. The new shelf has the same ID as another shelf.
- D. The SAS is cabled incorrectly.
Answer: D
NEW QUESTION 34
A customer called you after a failure in their Microsoft Hyper-V environment on the "SVM1" SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)
- A. Verify that the continuously-available option is set on the CIFS share.
- B. Verify that the branchcache option is set on the CIFS share.
- C. Verify that SMB2 is enabled.
- D. Verify that SMB3 is enabled.
Answer: A,C
NEW QUESTION 35
You configured iSCSI multipathing on a Windows host to a 2-node ONTAP cluster so that you can attach to some LUNs. You see that the host logging in to both iSCSI LIFs in the ONTAP cluster, and you notice that the igroup is correctly set. After you open Disk Management and rescan for disks, the NetApp LUNs do not show up.
In this scenario, what should be performed to enable the LUNs to be visible to the Windows host?
- A. Configure the SVM for FCP and try scanning again.
- B. Set up LUN mapping and try scanning again.
- C. Set up Selective LUN Mapping (SLM) and try scanning again.
- D. Configure the ONTAP nodes for HA and try scanning again.
Answer: C
NEW QUESTION 36
An administrator wants to keep an automatic daily up-to-date copy of a volume at a disaster recovery location.
What should the administrator do to achieve this goal?
- A. Configure a SyncMirror relationship to the remote location.
- B. Perform an NDMP dump to the remote location.
- C. Configure a SnapMirror relationship to the remote location.
- D. Perform a volume relocation to the remote location.
Answer: C
NEW QUESTION 37
Click the exhibit button.
A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.
- B. You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.
- C. You should configure e0M so that is tagged on VLAN 40.
- D. You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.
Answer: C,D
NEW QUESTION 38
Click the exhibit button.
A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)
- A. Verify that the access-based-enumeration share parameter is configured.
- B. Verify that the oplocks share property is configured.
- C. Verify that -offline-files parameter is set to manual on the share.
- D. Verify that the continuously -available share parameter is configured.
- E. Verify that the -symlink-properties parameter is enabled on the share.
Answer: A,B,D
NEW QUESTION 39
Click the exhibit button.
A customer is reporting that numbers in the statistics volume show command output appear to be incorrect.
Referring to the exhibit, which statement is correct?
- A. There are operation types that are not listed in the output.
- B. The problem is due to a difference in operation size.
- C. Perfstat should be used to explain the behavior.
- D. A case with NetApp should be raised to find the root cause.
Answer: B
NEW QUESTION 40
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?
- A. qos statistics performance show
- B. wafltop show -v -cpu -I 10 -c 5-n 6
- C. sysstat -c 30 -M 1
- D. qos statistics latency show
Answer: A
NEW QUESTION 41
Click the exhibit button.
When you log in to a node, a warning is displayed as shown in the exhibit.
Which statement is correct in this scenario?
- A. The partner still hosts the CFO aggregate for the node.
- B. The node cannot communicate with the rest of the nodes in the cluster.
- C. The node root volume was moved to a new aggregate.
- D. One or more RDB db files are damaged due to an internal software error.
Answer: B
NEW QUESTION 42
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)
- A. The client should be using Windows 10 for ODX support.
- B. SMB 3.0 disabled on the CIFS SVM.
- C. The source and target volumes reside on different cluster nodes.
- D. Deduplication is not enabled on the destination volume.
Answer: B,D
NEW QUESTION 43
Click the exhibit button.
You execute a few commands and many fail, as shown in the exhibit.
What could cause the error?
- A. The aggregates were manually brought offline.
- B. The bcomd user space process on cluster1-02 failed.
- C. The cluster-02 node is down.
- D. The mgwd user space process on cluster1-02 failed.
Answer: C
NEW QUESTION 44
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?
- A. Use the ifstat command to collect network performance data for the physical interface.
- B. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
- C. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.
- D. View the active network connections to the node to see if there a large number of active connections.
Answer: B
NEW QUESTION 45
Click the exhibit button.
Your customer is calling about their MetroCluster environment. They have provided you with the output of the metrocluster interconnect adapter show command.
Referring to the exhibit, which statement is correct?
- A. The InfiniBand cables should be connected in this configuration.
- B. For all MetroCluster configurations, this is expected output.
- C. The InfiniBand interconnect is not used in MetroCluster.
- D. This is a 2-node MetroCluster.
Answer: B
NEW QUESTION 46
A non-maskable interrupt event occurs. The system panics and then reboots.
In this scenario, what would have caused the panic?
- A. a secd process
- B. a watchdog timer
- C. a volume location distributed database
- D. an ICMP blackhole detector
Answer: B
NEW QUESTION 47
Click the exhibit button.
You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)
- A. FC switch SwB1
- B. ISL cables
- C. FC switch SwA2
- D. storage bridges BrB1
- E. FC switch SwA1
Answer: A,B,E
NEW QUESTION 48
Which statement is correct about the wafliron command?
- A. The wafliron command is used to correct parity inconsistencies.
- B. The wafliron command is used to correct WAFL i2p inconsistencies.
- C. The wafliron command is used to correct inconsistent user data blocks.
- D. The wafliron command is used to correct inconsistent WAFL metadata.
Answer: D
NEW QUESTION 49
A new cluster running ONTAP 9.5 has just been installed and you want to create a FlexGroup volume. Which action will accomplish this task?
- A. Use the storage pool create command.
- B. Use the volume create command.
- C. Use the volume size command.
- D. Use the Deploy utility to provision the FlexGroup volume.
Answer: A
NEW QUESTION 50
The root aggregate on your single-node ONTAP cluster failed. You have the configuration backups saved on your FTP server?
In this scenario, which two steps are part of the recovery procedure? (Choose two.)
- A. Perform a Netboot using the configuration backup.
- B. Create a new aggregate and set its ha_policy option to sfo.
- C. Create a new root aggregate and set its ha_policy option to cfo.
- D. Boot into maintenance mode.
Answer: C,D
NEW QUESTION 51
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B.
The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)
- A. On the DR partner at site B, perform the process to heal the root aggregate.
- B. On the DR partner at site A, perform the process to heal the data aggregates.
- C. On the DR partner at site A, perform the process to switchover.
- D. Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).
Answer: A,C
NEW QUESTION 52
......
100% Free NS0-592 Daily Practice Exam With 67 Questions: https://www.pass4leader.com/NetworkAppliance/NS0-592-exam.html