HPE0-J68 exam questions for practice in 2021 Updated 178 Questions [Q100-Q115]

Share

HPE0-J68 exam questions for practice in 2021 Updated 178 Questions

Updated Dec-2021 Premium HPE0-J68 Exam Engine pdf - Download Free Updated 178 Questions

NEW QUESTION 100
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?

  • A. HPE MSA 2052 Storage
  • B. HPE SimpliVity 380
  • C. HPE Nimble CS1000 system
  • D. HPE 3PAR StoreServ 8200

Answer: B

 

NEW QUESTION 101
A customer has a 3PAR storeserv with FC and SSD drives who would like to improve the performance for random reads. Which 3PAR Storeserve feature would provide better read performance?

  • A. Smart Cache
  • B. Adaptive Flash Cache
  • C. Deduplication
  • D. Express Layout

Answer: B

 

NEW QUESTION 102
You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more than 500GB.
Which technology should you recommend?

  • A. NAND SSD
  • B. SRAM
  • C. NVMe SCM
  • D. DRAM

Answer: A

 

NEW QUESTION 103
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?

  • A. IVR
  • B. Port isolation
  • C. Zoning
  • D. VSAN

Answer: B

 

NEW QUESTION 104
In an ISCSI based storage system Proof-Of-Concept project ,the customer is not satisfied with the performance of their video streaming application .What would you recommended to the customer to optimize the excisting environment?

  • A. Consolidate the heterogeneous switches in the network
  • B. Enable jumbo frames on required components
  • C. Increase the switch buffer to buffer credits
  • D. Enable hardware ISCSI initiator

Answer: B

 

NEW QUESTION 105
A customer uses Recovery manager central for Vmware (RMC-V).They need to ability to perform granular recovery of application item directly from backups...Which solution integrates with RMC-V to provide the desired requirements?

  • A. Netbackup
  • B. Veeam Backup & Replication
  • C. CommVault
  • D. StoreOnce cloudbank

Answer: B

 

NEW QUESTION 106
A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.
What is the latest tape drive technology that will provide backward compatibility?

  • A. LTO7
  • B. LTO5
  • C. LTO8
  • D. LTO6

Answer: A

 

NEW QUESTION 107
A customer has completely virtualized their datacenter with VMware. You propose a SimpliVity solution to replace their aging hardware.
Which SimpliVity features should you emphasize in your presentation? (Choose two.)

  • A. It utilizes a unified ASIC for performance
  • B. It utilizes the Storage Management Utility for management and monitoring
  • C. It includes deduplication and backup capabilities
  • D. It provides S3 file access
  • E. It uses native hypervisor management tools for management

Answer: B,C

 

NEW QUESTION 108
An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer's technical requirements?

  • A. Extended Fabric
  • B. Intelligent Resilient Framework licenses
  • C. HPE 3PAR Remote Copy
  • D. HPE StoreOnce Replication

Answer: C

 

NEW QUESTION 109
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

  • A. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
  • B. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
  • C. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
  • D. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.

Answer: A

 

NEW QUESTION 110
You are presenting the HPE StoreEver portfolio to a media agency.
What advantage is offered when using LTFS?

  • A. WORM functionality for file, block and object storage access on tape
  • B. file and block data management within an HPE HSM solution
  • C. file encryption with public and private key management
  • D. file management capabilities will be provided with tape cartridges

Answer: D

 

NEW QUESTION 111
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?

  • A. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
  • B. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
  • C. A maximum of two switches can be used in an IRF stack when connecting storage.
  • D. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.

Answer: C

 

NEW QUESTION 112
Match the data access type in a SAN fabric to the correct description.

Answer:

Explanation:

 

NEW QUESTION 113
A customer currently runs MSA 2040 SAS storage system with SFF drives. They are planning a hardware refresh. The customer is using virtual pools only, and is concerned about problematic data migration to the new platform.
How can the update to MSA2050 be performed?

  • A. Existing drives can be moved to the new system; both systems need to be offline
  • B. Peer migration license must be purchased for the offline migration
  • C. Existing drives can be moved to the new system; both systems need to be online
  • D. Peer migration license must be purchased for the online migration

Answer: B

 

NEW QUESTION 114
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)

  • A. host
  • B. application
  • C. ISCSI network(SAN)
  • D. Ethernet network (LAN)
  • E. operating system
  • F. storage

Answer: A,B,C

 

NEW QUESTION 115
......

Authentic HPE0-J68 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.pass4leader.com/HP/HPE0-J68-exam.html

HP HPE0-J68 Real Exam Questions Guaranteed Updated Dump from Pass4Leader : https://drive.google.com/open?id=1GAhFYPZv2_y3uc-WrR4oGDKPOKoj9aAc