[Dec 27, 2023] Latest HCIA-Access H35-210_V2.5-ENU Actual Free Exam Questions
HCIA-Access H35-210_V2.5-ENU Dumps Updated Practice Test and 373 unique questions
Huawei H35-210_V2.5-ENU certification exam is designed to test the candidates' knowledge and skills related to network access technologies, including network access security, WLAN planning and optimization, network access control, and network access troubleshooting. H35-210_V2.5-ENU exam is intended for IT professionals who have experience in network access technologies and are looking to enhance their skills and knowledge to excel in their careers. The HCIA-Access V2.5 certification is recognized globally and is highly valued in the IT industry.
The H35-210_V2.5-ENU certification exam is an important stepping stone towards advanced Huawei certifications, such as the HCIP-Access and HCIE-Access certifications. By passing H35-210_V2.5-ENU exam, individuals can progress to higher levels of certification and demonstrate their expertise in access network technologies.
The HCIA-Access V2.5 certification exam is designed to test the candidate's understanding of access network technology, including the principles of access network planning, design, deployment, and maintenance. H35-210_V2.5-ENU exam covers a range of topics, including network access technologies, access network planning and design, access network devices and equipment, access network maintenance and troubleshooting, and access network security.
NEW QUESTION # 172
There is one MA/EA5800-X7 device with only one main control board. It is necessary to check the software version of its main control board. Which of the following commands is correct?
- A. display version 0/8
- B. display version 0/10
- C. display version 0/7
- D. display version 0/6
Answer: A
NEW QUESTION # 173
In the EPON network, which parameter is used to filter the downstream data on the ONU?
- A. ONT ID
- B. ALLOC ID
- C. LLID
- D. GEM-PORT ID
Answer: C
NEW QUESTION # 174
Is the following description correct? The goal of ATM, that is, the biggest feature of ATM, is to achieve the best network resource utilization for any form of business distribution. To achieve this goal, statistical multiplexing of network resources is necessary.
- A. False
- B. True
Answer: B
NEW QUESTION # 175
Is the following description correct? MAS Address by48bitComposition, usually with12Bit16Hexadecimal representation, before6Bit16Base numbers are represented by IEEE Responsible for unified distribution, used to determine the uniqueness of the manufacturer, and later6Bit16The hexadecimal numbers are managed by each manufacturer.
- A. False
- B. True
Answer: B
NEW QUESTION # 176
Regarding EPON, which of the following descriptions is incorrect?
- A. In the upstream direction from the ONU to the OLT, each ONU uses the broadcast mode to share the upstream bandwidth.
- B. The downstream data stream from the OLT to the ONU is encapsulated as an Ethernet message, and the corresponding LLID is attached and sent in the tree PON network. The optical splitter in the ODN broadcasts the data stream to each branch, and all ONUs can receive the downlink Ethernet data frame, and selectively receive their own data according to the LLID.
- C. In the logical topology, the EPON protocol establishes a logical link for the OLT to each ONU, and the leading byte of the Ethernet data frame carries the logical link identity, that is, LLID (Logical Link Identity).
- D. The EPON standard is one of many TDM-PON standards and has the basic characteristics of a TDM-PON network: a tree topology network is composed of OLT, ONU and ODN (Optical Distribution Network).
Answer: A
NEW QUESTION # 177
Regarding OLT+MDU networking and OLT+ONT networking, what are the correct statements about multicast configuration?
- A. When the unicast VLAN and the multicast VLAN are different, under the OLT+MDU networking, an additional gemport-maping and service-port for the multicast VLAN on the MDU should be added on the OLT.
- B. When the unicast VLAN and the multicast VLAN are different, the configuration of the two on the OLT is the same.
- C. The configuration of the two on the OLT is the same.
- D. None of the above
Answer: A
NEW QUESTION # 178
Is the following description correct? When MA5600T creates an ADSL line configuration template, you can specify the template number or not. If you do not specify it, the system will automatically assign the smallest idle template number.
- A. False
- B. True
Answer: B
NEW QUESTION # 179
Which of the following DHCP messages is sent by the DHCP client?
- A. Offer
- B. Nak
- C. ACK
- D. Discovery
Answer: D
NEW QUESTION # 180
If the PON system is regarded as a black box, the external interfaces presented by the OLT and ONU are mainly Ethernet interfaces, and the GEM encapsulation and decapsulation take place inside the PON system.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 181
Which control frame messages are defined by MPCP?
- A. REGISTER
- B. REGISTER ACK
- C. REPORT
- D. GATE
Answer: A,B,C,D
NEW QUESTION # 182
Which of the following descriptions about DHCP is incorrect?
- A. Multiple DHCP servers are not allowed in the network at the same time, because multiple servers will respond at the same time, and the client cannot select an address
- B. The message interaction experienced by DHCP to obtain an address normally includes Discover, Offer, Request, ACK
- C. The Discover message between the DHCP Relay and the DHCP server is a unicast message
- D. If the client abandons the current IP address, she uses a DHCP RELEASE message to notify the server, and the server reclaims this address for next use.
Answer: A
NEW QUESTION # 183
The 48-bit value of the MAC address of the computer network card is uniformly assigned by the IETF to each manufacturer, and is unique in the world.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION # 184
MA5600 supports ADSL2+, which of the following descriptions about ADSL2+ is incorrect?
- A. The spectrum bandwidth is 1.104MHz
- B. The maximum downlink speed is 24Mbit/s
- C. Use high frequency bands, sub-channels (32-511) and sub-channels above 512.
- D. The farthest reachable distance is 6.5km
Answer: A
NEW QUESTION # 185
What is the correct correspondence between IP address and MAC address in a broadcast domain?
- A. One MAC address can correspond to multiple IP addresses
- B. One IP address can correspond to multiple MAC addresses
- C. None of the above
- D. One MAC address can only correspond to one IP address
Answer: A
NEW QUESTION # 186
Regarding MIB, which of the following descriptions is incorrect?
- A. OID in MIB is usually marked with a set of letters
- B. The full name of MIB is Management Information Base
- C. The MIB information of the device can be read through the MIB BROWSER tool.
- D. MIB is an important part of SNMP network management model
Answer: A
NEW QUESTION # 187
With regard to the three VLANs with different attributes (common, QinQ, and Stacking), the MA5600T uses the default tag transformation rules (that is, tag-transform is set to default) when configuring the service flow .
Which one of the following descriptions is incorrect?
- A. common vlan service flow, for the service flow without tag, the default is add, for the service flow with tag, the default is translate
- B. None of the above
- C. The default mode of all QinQ VLAN service flows is add
- D. stacking vlan service flow, the default is add-double for those without tags; the default is translate-and-add for service flows with tags
Answer: B
NEW QUESTION # 188
Which of the following belongs to the management protocol between the OLT and MXU in the GPON network?
- A. SNMP
- B. IGMP
- C. OAM
- D. DHCP
Answer: A
NEW QUESTION # 189
When configuring the GPON line template, what are the QoS modes? (Multiple choice)
- A. TCONT-car
- B. GEM-car
- C. priority-queue
- D. flow-car
Answer: C,D
NEW QUESTION # 190
If the ONT is added on the GPON port by confirmation, what functions need to be enabled on the OLT?
- A. ONT auto-discovery
- B. POE function
- C. GPON line encryption
- D. PON port FEC function
Answer: A
NEW QUESTION # 191
Is the following description correct? The simplified method of MA5600T/MA5680T GPON Internet service is optimized for the excessive number of templates and complicated configuration in the template mode, reducing user configuration workload and subsequent maintenance costs. The simplified mode currently only supports GPON FTTH scenarios.
For newly-built GPON FTTH scenarios and scenarios that do not require high QoS, the simplified mode can be used for service configuration.
- A. False
- B. True
Answer: B
NEW QUESTION # 192
Is the following description correct? When the MA5600T MG interface communicates with the MGC through the H.248 protocol, the H.248 protocol version configuration that the MG interface starts to negotiate may be inconsistent with the MGC side.
- A. False
- B. True
Answer: A
NEW QUESTION # 193
Is the following description correct? In the EPON network, the gemport is used to carry the service flow.
- A. False
- B. True
Answer: A
NEW QUESTION # 194
Compared with the template mode, when the MA5600T configures FTTH services in a simplified manner, which of the following steps does not require configuration?
- A. Configure the line template
- B. Configure traffic template
- C. Configure the DBA template
- D. Configure business templates
Answer: A,C,D
NEW QUESTION # 195
Regarding the description of UA5000, which of the following statements is wrong?
- A. UA5000 supports ADSL2+ service access.
- B. The UA5000 does not support VDSL2 service access temporarily.
- C. UA5000 adopts the same hardware platform and supports the integration of PSTN, NGN, IMS and FTTx.
- D. UA5000 supports various traditional private line services under TDM/PSTN.
Answer: B
NEW QUESTION # 196
......
Verified H35-210_V2.5-ENU dumps Q&As - 100% Pass from Pass4Leader: https://www.pass4leader.com/Huawei/H35-210_V2.5-ENU-exam.html
Latest 100% Exam Passing Ratio - H35-210_V2.5-ENU Dumps PDF: https://drive.google.com/open?id=1_4VCLtxZs8hQJ-nRH8KIM9xsFgXQJVZ-