[Aug-2022] C_IBP_2205 Exam Questions and Valid C_IBP_2205 Dumps PDF
C_IBP_2205 Brain Dump: A Study Guide with Tips & Tricks for passing Exam
NEW QUESTION 37
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Capacity leveling will be possible for production and storage resources.
- B. Minimum capacity utilization will result in pull production occurring.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
Answer: C,D
NEW QUESTION 38
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Periods are identified by an alphanumeric prefix and profiles by an integer.
- B. Both periods and profiles have start and end dates.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Both periods and profiles are identified by a unique integer.
Answer: A,C
NEW QUESTION 39
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note:
There are 2 correct answers to this question.
- A. Splitting the values from detailed to aggregated level by using a copy operator
- B. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level, based on the time profile attribute
Answer: B,C
NEW QUESTION 40
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Set up a three-tier landscape using transport, starting from the development system to test and production.
- B. Create additional test planning areas in the production system to support cutover needs.
- C. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
- D. Create additional planning areas in the test system to support training needs.
Answer: A,C
NEW QUESTION 41
Which one of the following values can you use in disaggregation expressions?
- A. If (Attribute) = 0
- B. KF1 (Stored) + Helper KF
- C. KF1 (Stored) + KF2 (Stored) + Attribute
- D. KF1 (Calculated) + Attribute
Answer: A
NEW QUESTION 42
Which supply chain challenge is addressed by SAP IBP for demand?
- A. Inability to synchronize supply and demand
- B. Inability to understand and shape actual demand
- C. Inability to arrive at consensus demand
- D. Inability to respond to short-term changes in supply and demand
Answer: B
NEW QUESTION 43
You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app.Which methods can you use?Note: There are 3 correct answers to this question.
- A. Proportional disaggregation by using KF2 in the expression
- B. Disaggregation according to a user-defined expression
- C. Disaggregation in batch triggered by an application job
- D. Disaggregation according to a helper key figure
- E. Disaggregation according to an equal split
Answer: A,B,E
NEW QUESTION 44
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Proportional disaggregation by using KF2 in the expression
- B. Disaggregation according to a user-defined expression
- C. Disaggregation in batch triggered by an application job
- D. An internal system-generated disaggregation
- E. Disaggregation according to an equal split
Answer: A,B,E
NEW QUESTION 45
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
- B. Number of fair share segments Additional tiering costs (default) Maximum inventory
- C. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- D. Number of fair share segments Additional tiering costs (default) Inventory days of supply
Answer: A
NEW QUESTION 46
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. A planning area with the copy operators assigned must be bundled in one collection.
- B. Configuration items should be bundled in the collections based on the SAP IBP project stream.
- C. A planning area with its time profile must be bundled in one collection.
- D. You should delete collections after they have been transported.
Answer: A,C
NEW QUESTION 47
Which of the following are features of the S&OP process templates?Note: There are 2 correct answers to this question.
- A. New instances of templates allow for re-use of the same processes.
- B. All process templates are assigned to dashboards.
- C. Each step depicted in the template can have tasks associated with it.
- D. The S&OP process step can be started with an application job.
Answer: A,C
NEW QUESTION 48
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Specifying target key figure is mandatory.
- B. Selecting by attribute with option 'contain' is possible.
- C. Specifying target key figure that is time independent is possible.
- D. Specifying source key figure is mandatory.
Answer: A,D
NEW QUESTION 49
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Rename the charts.
- B. Add process templates.
- C. Display all assigned analytics on a single UI.
- D. Link two analytics charts.
- E. Organize charts.
Answer: B,C,E
NEW QUESTION 50
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using a attribute as a key figure
- B. Using a local member
- C. Using a appropriate period weight factor
- D. Using a key figure calculation
Answer: C
NEW QUESTION 51
What is a prerequisite for modeling outsourced manufacturers with production capacity?
- A. Model target inventory and stocks at the outsourced location.
- B. Model production costs for internal and external production resources to model priority.
- C. Use production lead times and offsets to manage components at the outsourced location.
- D. Ensure that multiple modes of transportation are set up.
Answer: B
NEW QUESTION 52
What are some of the available ABC segmentation methods in SAP IBP?Note: There are 2 correct answers to this question.
- A. By Number of Items (Sorted Values)
- B. By Number of Items (Sorted Average)
- C. By Pareto Principle (Sorted and Cumulated %)
- D. By Pareto Principle (Sorted and Calculated Values)
Answer: A,D
NEW QUESTION 53
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.
- A. Geographic Chart Types
- B. Simulation Chart Types
- C. Comparison Chart Types
- D. Seasonal Chart Types
- E. Trend Chart Types
Answer: C,D,E
NEW QUESTION 54
What type of key figure requires a planning level to have all attributes as roots?
- A. The special key figure marked as an aggregate key figure
- B. The time independent key figure, such as FCSTMAPE
- C. The conversion key figure, such as exchange rate
- D. The attribute transformation key figure, such as PERIODID1
Answer: A
NEW QUESTION 55
Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.
- A. Planning unit
- B. UOM to ID
- C. Type of algorithm to use
- D. Target currency
Answer: B,C
NEW QUESTION 56
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.
- A. SAP IBP for demand
- B. SAP IBP for sales and operations
- C. SAP IBP for response and supply
- D. DDMRP
Answer: B,C
NEW QUESTION 57
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type INTEGER and assigned to a compound master data type
- B. Created as type INTEGER and assigned to a simple master data type
- C. Created as type DECIMAL and assigned to a compound master data type
- D. Created as type NVARCHAR and assigned to an external master data type
Answer: C
NEW QUESTION 58
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are
2 correct answers to this question.
- A. The key figure is stored and system editable.
- B. The key figure is calculated and system editable.
- C. The key figure is calculated and all editable.
- D. The key figure is stored and all editable.
Answer: D
NEW QUESTION 59
......
C_IBP_2205 Exam Questions: Free PDF Download Recently Updated Questions: https://www.pass4leader.com/SAP/C_IBP_2205-exam.html
C_IBP_2205 Certification Exam Dumps with 80 Practice Test Questions: https://drive.google.com/open?id=13BvVGY_viqEDevrJlGJO9rBbFH6TnyXa