[Apr 04, 2024] Genuine 1z0-996-22 Exam Dumps New 2024 Oracle Pratice Exam
New 2024 Realistic 1z0-996-22 Dumps Test Engine Exam Questions in here
Oracle 1z0-996-22 (Oracle Utilities Customer Cloud Service 2022 Implementation Professional) Exam is a challenging certification exam designed for professionals who want to demonstrate their expertise in implementing and configuring Oracle Utilities Customer Cloud Service 2022 solutions. Passing the exam can provide various benefits, including recognition from peers, a higher salary, and more job opportunities in the field of Oracle Utilities Customer Cloud Service 2022.
NEW QUESTION # 34
On which three entities can proration be disabled? (Choose three.)
- A. Calculation Rule Business Object
- B. Bill Factor
- C. Calculation Rule
- D. Rate Version Calculation Group
- E. Rate Schedule
Answer: A,D,E
NEW QUESTION # 35
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will haveto be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. billing usage rules
- B. valid head-end systems, valid device configuration types, and the electricity service type
- C. the model number
- D. the device's date of manufacturer
Answer: B
Explanation:
Device types define information about a class of devices, including properties that apply to all devices of a type1. For the AMI roll-out, the device type administrative data should consider the following aspects:
Valid head-end systems: A head-end system is a system that communicates with devices and collects measurement and event data from them2. The device type should specify a fallback head-end system and a list of valid head-end systems that can be used for the devices of that type1. This will allow the customer to choose the head-end system that best suits their needs and preferences.
Valid device configuration types: A device configuration type defines the configuration parameters and commands that can be applied to a device of a certain type3. The device type should specify the valid list of device configuration types that can be used for the devices of that type1. This will ensure that the devices are configured consistently and correctly to support the existing tariffs for billing.
Electricity service type: A service type defines the characteristics of a service that is provided to a customer, such as the commodity, the rate schedule, the bill cycle, etc4. The device type should specify the electricity service type that is associated with the devices of that type1. This will enable the system to calculate the usage and billing for the devices based on the service type. References:
1: Understanding Device Types
2: Head End Systems
3: Device Configuration Types
4: Service Types
NEW QUESTION # 36
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Three
- B. None
- C. Four
- D. One
- E. Two
Answer: D
NEW QUESTION # 37
Approval Profiles control which aspects of an Adjustment?
- A. control how adjustments are approved
- B. if an adjustment requires approval before it's frozen
- C. whether current and/or payoff balance are affected by the adjustment
- D. whether the adjustment should appear on the customer's next bill
- E. information defaulted on an Adjustment
Answer: C
Explanation:
Reference:
%20Adjustment%20Approval.pdf
NEW QUESTION # 38
When a service agreement is created, it is based on a template called the Service Agreement Type (SA Type) and values may be defaulted from a Start Option.
Which three attributes can get defaulted from a Start Option? (Choose three.)
- A. Contract Quantities
- B. Service to be billed
- C. Rate
- D. Terms and Conditions
- E. CIS Division
Answer: A,B,C
Explanation:
A Start Option is a configuration option that allows you to define the default values for certain attributes of a service agreement when it is created. A Start Option is linked to a Service Agreement Type (SA Type), which is a template for a service agreement that specifies its characteristics and behavior. A Start Option can default the following attributes of a service agreement:
Service to be billed: This is the service point and the measuring component that are associated with the service agreement and determine the billing and metering of the service. The service to be billed can be defaulted from the Start Option based on the service point type and the measuring component type.
Contract Quantities: These are the quantities that are agreed upon between the customer and the utility for the service agreement. They can include the contract demand, the contract capacity, the contract energy, and the contract power factor. The contract quantities can be defaulted from the Start Option based on the rate schedule and the service point type.
Rate: This is the rate schedule that defines the charges and adjustments that apply to the service agreement. The rate can be defaulted from the Start Option based on the service point type and the measuring component type.
References: Start Option - Main, Oracle Utilities Customer Cloud Service - Get Started, Service Agreement - Main
NEW QUESTION # 39
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Usage Rule Type
- B. in the Device Type
- C. in the Usage Subscription Type
- D. in the Measuring Component Type
- E. in the Service Point Type
Answer: C
NEW QUESTION # 40
Your client has the following requirements:
Many customers are installing their own solar electrical generationequipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid.
Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
- B. Create two service points: one for subtractive import and the other for consumptive export.
- C. Create two new measuringcomponent types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
- D. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
Answer: C
Explanation:
According to the Oracle Utilities Customer Cloud Service User Guides, measuring component types define the most important properties of a measuring component, such as what it measures, how regularly it measures it, and whether it should be connected to a physical device1. Measuring component types also specify how the measuring component's final measurements should be stored, and whether they are subtractive or consumptive1. In this case, the client needs to measure both the energy imported and exported by the customers who have solar electrical generation equipment. Therefore, the solution is to create two new measuring component types, one for subtractive import and the other for consumptive export, and link them to the same scalar device that has separate registers for both readings. This way, the measuring components can store the measurements in kWh and apply the appropriate sign to indicate the direction of the energy flow2. References:
Understanding Measuring Component Types
Measuring Components
NEW QUESTION # 41
When you cancel a payment, what will the system automatically do?
- A. generate a new Financial Transaction to reverse the original Financial Transaction
- B. impact the credit rating
- C. charge a NSF Fee for the payment cancellation
- D. cancel all tenders associated with the payment
Answer: A
Explanation:
When a payment is canceled in Oracle Utilities Customer Cloud Service, the system automatically generates a new Financial Transaction to reverse the original Financial Transaction. This process is an integral part of the payment cancellation procedure, ensuring that the financial records are accurately updated to reflect the reversal of the previous transaction. It is important to note that canceling a payment is distinct from canceling a tender, and it typically occurs if the original distribution was frozen and found to be incorrect.
References:
Oracle documentation on Cancel (A Payment): Cancel (A Payment).
Oracle documentation on How To Cancel A Payment Arrangement: How To Cancel A Payment Arrangement.
NEW QUESTION # 42
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription BO
- B. the Usage Subscription Type
- C. the requesting system or user input
- D. the Deferred MonitorCalculation Algorithm
Answer: C
Explanation:
According to the Oracle Utilities Customer Cloud Service User Guides, date breaks are used to break up a usage period into sub-periods based on the dates on which rate changes took place for the service point1. Date breaks are supplied by the requesting system or user input when they request a usage transaction1. The requesting system or user input can specify the date range for the usage transaction, which is referred to as the calculation period1. The usage calculation engine then segregates the usage into multiple usage periods based on the date breaks1. The other options are not used to supply date breaks. The Deferred Monitor Calculation Algorithm is used to determine whether a usage transaction should be deferred or calculated immediately2. The Usage Subscription Type is used to define the characteristics and rules of a usage subscription, such as the usage calculation group, the meter exchange option, and the usage subscription algorithm3. The Usage Subscription BO is used to store the information about a usage subscription, such as the service point, the usage group, the usage calculation group, and the usage transactions4. References: About Usage Transactions, Deferred Monitor Calculation Algorithm, Usage Subscription Type, Usage Subscription BO, Oracle Utilities Customer Cloud Service - Get Started
NEW QUESTION # 43
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components can't have specifications.
- B. Components have a disposition that tracks their location and status.
- C. Components can be installed at locations.
- D. Components are not a class of assets.
- E. Components are attached to assets.
Answer: C,E
NEW QUESTION # 44
What Service Order activity types does theapplication include?
- A. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
- B. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- C. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- D. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
Answer: A
Explanation:
According to the Oracle Utilities Customer Cloud Service User Guides, the application includes the following service order activity types12:
Enable Service: This activity type is used to activate a service point or a device that is currently inactive or disabled.
Disable Service: This activity type is used to deactivate a service point or a device that is currently active or enabled.
Install Meter: This activity type is used to install a new meter at a service point or replace an existing meter with a different one.
Remove Meter: This activity type is used to remove a meter from a service point or replace it with a dummy device.
Exchange Meter: This activity type is used to exchange a meter with another meter of the same type at a service point.
Back-to-Back Service: This activity type is used to perform a series of service order activities in a single transaction, such as moving out a customer and moving in another customer at the same service point.
References: Understanding Service Order Field Activity Types, Understanding Service Order Activity Types, Oracle Utilities Customer Cloud Service - Get Started
NEW QUESTION # 45
Which statement correctly describes the relation between a device and a measuring component?
- A. Two measuring components on the same device should have the same Units of Measure (UOM).
- B. A device can have any combination of interval and/or scalar measuring components.
- C. A device should have only one measuring component type.
- D. A device configuration links a device only to interval channels.
Answer: B
Explanation:
A device is a physical or logical entity that can measure, control, or monitor something1. A measuring component is a single point for which data will be received and stored in the system2. A device can have one or more measuring components, or none at all2. Measuring components can be classified into two primary classes: scalar and interval2. Scalar measuring components are measured at unpredictable intervals, such as once a month2. Interval measuring components are measured at predictable intervals, such as every 15 minutes, every 30 minutes, every hour, etc2. A device can have any combination of interval and/or scalar measuring components, depending on the device type, device configuration, and measuring component type23. Therefore, the correct answer is D. A device can have any combination of interval and/or scalar measuring components. References:
About Devices
About Measuring Components
Maintaining Measuring Components
NEW QUESTION # 46
What can cause a bill segment to have multiple bill calculation headers?
- A. multiple Scheduled Read Dates covered by the bill period
- B. multiple Rate Version Calculation Group
- C. proration at Bill Factor level
- D. multiple service agreements being covered by a bill segment
- E. proration at Calculation Rules level
Answer: C
NEW QUESTION # 47
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributesof a measuring component?
- A. Model and Serial Number
- B. Channel ID and Badge Number
- C. Manufacturer and Model
- D. Serial Number and Badge Number
- E. Channel Multiplier and Channel ID
Answer: E
Explanation:
measuring component is a single point for which data will be received and stored in the system. A measuring component can be associated to a device, which can have one or more measuring components, or it can be
"virtual" or "stand-alone," meaning that it is not associated to a device. A measuring component can have various attributes that define its characteristics, such as the measuring component type, the device configuration, the VEE groups, and the scalar or interval class. Two of the attributes that are specific to a measuring component are:
Channel Multiplier: A channel multiplier is a value that is used to adjust the measurement data received from the device to the correct units of measure. For example, if the device measures consumption in cubic feet, but the system stores it in cubic meters, the channel multiplier is used to convert the units.
Channel ID: A channel ID is a unique identifier that is assigned to a measuring component by the device or the head end system. It is used to match the measurement data received from the device to the corresponding measuring component in the system.
The other options are not correct attributes of a measuring component, because:
Channel ID and Badge Number: A badge number is an attribute of a device, not a measuring component. It is a unique identifier that is assigned to a device by the manufacturer or the utility. It is used to track the device's history and location.
Serial Number and Badge Number: A serial number is also an attribute of a device, not a measuring component. It is a unique identifier that is assigned to a device by the manufacturer. It is used to identify the device's model and specifications.
Model and Serial Number: A model and a serial number are both attributes of a device, not a measuring component. They are used to identify the device's manufacturer and specifications.
Manufacturer and Model: A manufacturer and a model are also attributes of a device, not a measuring component. They are used to identify the device's brand and type.
References:
About Measuring Components
Measuring Components
NEW QUESTION # 48
Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?
- A. Account, Customer Class, Premise, Service Agreement, Service Port
- B. Account, Bill, Customer Class, Premise, Service Agreement
- C. Account, Person, Premise, Service Agreement, Service Port
- D. Account, Bill, Premise, Service Agreement, Service Port
- E. Account, Customer Class, Person, Premise, Service Agreement
Answer: C
NEW QUESTION # 49
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Start Service Agreement
- B. Create Usage Subscription
- C. Create Service Point
- D. Customer Device Compatibility Check
- E. Check for Measurement
Answer: D,E
NEW QUESTION # 50
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components can't have specifications.
- B. Components have a disposition that tracks their location and status.
- C. Components can be installed at locations.
- D. Components are not a class of assets.
- E. Components are attached to assets.
Answer: C,E
Explanation:
In Oracle Utilities Customer Cloud Service, components have specific characteristics in relation to assets. The two true statements about components are:
Components are attached to assets (Option A): Components are devices or objects that are physically attached to another device, typically an asset. Examples include communication relays and components that can be attached to analog meters to connect them to smart grids. Components are always associated with another device and cannot exist independently in terms of installation or location.
Components can be installed at locations (Option C): While components are attached to assets, they can be installed at specific locations. The installation of a component is essentially the installation of the asset to which the component is attached. Therefore, components indirectly have a location where they are installed through their associated assets.
References:
Oracle documentation on About Assets and Components: About Assets.
Oracle documentation on Oracle Utilities Customer Cloud Service New Features: Oracle Utilities Customer Cloud 21C What's New.
NEW QUESTION # 51
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- C. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
- D. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
Answer: A
NEW QUESTION # 52
Which statement is true about specifications?
- A. Specifications can include peer specifications.
- B. Specifications apply only to assets and not to components.
- C. A single specification can only be used on one asset.
- D. Specifications include the inspection history of an asset.
Answer: A
Explanation:
Specifications are sets of attributes that define the physical and functional characteristics of an asset or a component. Specifications can be used to store information such as dimensions, weight, color, model, serial number, manufacturer, and so on. Specifications can also include peer specifications, which are specifications that are related to the same asset or component, but have different purposes or scopes. For example, an asset can have a specification for its installation details, and another specification for its maintenance requirements.
Peer specifications can be linked by using the peer specification type and the peer specification ID fields. The other options are not true because specifications do not include the inspection history of an asset, which is stored in the asset history business object. Specifications can apply to both assets and components, as long as they have the same specification type. A single specification can be used on multiple assets or components, as long as they have the same specification type and specification ID. References: Specifications, About Specifications, Peer Specifications
NEW QUESTION # 53
How many devices can be installed at a service point at an instance in time?
- A. exactly one device
- B. one for each measuring component
- C. one for each service type
- D. up to three devices
Answer: A
Explanation:
According to the Oracle Utilities Customer Cloud Service User Guide1, service points are physical locations at which a company supplies service and are used to store information describing the type of service supplied and how it is measured. Devices are installed at service points, and the relationship between individual service points and devices can change over time. However, a service point may only have one device. If multiple devices at a service point are required, a parent and child service point relationship must be defined to create a hierarchy of service points. On each service point, users can specify a parent service point. This feature can be used to link multiple devices to a single market service point ID or to represent different service types or measuring components at a service point. References: Oracle Utilities Customer Cloud Service - Get Started, About Service Points, Oracle Utilities Operational Device Cloud Service - Get Started
NEW QUESTION # 54
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Measuring Component Type
- B. Device Type and Measuring Component Type
- C. Usage Type
- D. Device Configuration Type
- E. Device Type
Answer: A
NEW QUESTION # 55
Which relationship must be established with an external system or a service provider before creating bill determinants?
- A. Usage Factor
- B. Usage Rule
- C. Usage Subscription
- D. Usage Transaction
Answer: C
NEW QUESTION # 56
Which statement is true about specifications?
- A. Specifications apply only to assets and not to components.
- B. Specifications can include peer specifications.
- C. A single specification can only be used on one asset.
- D. Specifications include the inspection history of an asset.
Answer: C
NEW QUESTION # 57
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Smart Meter Command
- B. Service Point
- C. Device Configuration
- D. Device
Answer: B
NEW QUESTION # 58
Which three statements are true about thedifferent types of measuring components? (Choose three.)
- A. Scalar measuring components contain a single measurement for an arbitrary period of time.
- B. Only physical measuring components reference a device configuration.
- C. The measuring component types are physical, standalone, scratchpad, and TOU.
- D. Seconds-per-interval (SPI) is one of the attributes of scalar measuring components.
- E. The terms register and channel are synonyms for measuring component.
Answer: A,D,E
Explanation:
Measuring components are the parts of a device that record measurements of usage or demand. There are four types of measuring components: physical, standalone, scratchpad, and TOU. Physical measuring components are associated with a physical device and reference a device configuration. Standalone measuring components are not associated with a physical device and do not reference a device configuration. Scratchpad measuring components are used to store intermediate or temporary measurements that are not intended for billing or analysis. TOU measuring components are used to store time-of-use measurements that are derived from other measuring components. Scalar measuring components are a subtype of physical or standalone measuring components that contain a single measurement for an arbitrary period of time. They have attributes such as seconds-per-interval (SPI), which defines the duration of each interval in seconds, and auto-read, which indicates whether the measuring component is read automatically or manually. The terms register and channel are synonyms for measuring component and are used interchangeably in the application and documentation. References: Measuring Components, About Measuring Components, Scalar Measuring Components
NEW QUESTION # 59
......
Oracle 1z0-996-22 certification exam is suitable for professionals who are interested in advancing their careers in the field of Oracle Utilities Customer Cloud Service. Oracle Utilities Customer Cloud Service 2022 Implementation Professional certification is particularly relevant for individuals who work as implementation specialists, technical consultants, or system administrators. Oracle Utilities Customer Cloud Service 2022 Implementation Professional certification demonstrates a high level of expertise in the implementation of Oracle Utilities Customer Cloud Service 2022 and can help professionals stand out in a competitive job market.
Oracle 1z0-996-22 Certification Exam consists of 60 multiple-choice questions, and candidates have 105 minutes to complete the exam. The passing score for 1z0-996-22 exam is 63%. Upon passing the exam, candidates will receive an Oracle Certified Implementation Specialist certification, which demonstrates their expertise in implementing and managing Oracle Utilities Customer Cloud Service 2022. Oracle Utilities Customer Cloud Service 2022 Implementation Professional certification is recognized globally and can help professionals advance their careers in the field of utility management.
Grab latest Amazon 1z0-996-22 Dumps as PDF Updated: https://www.pass4leader.com/Oracle/1z0-996-22-exam.html
Updated Official licence for 1z0-996-22 Certified by 1z0-996-22 Dumps PDF: https://drive.google.com/open?id=1p1RYuncrq4BkaoMgC0HUuEyi2q0l8sOs