Free ISTQB ISTQB-CTFL Practice Test & Real Exam Questions, Page 1

Question #1

Consider a given test plan which, among others, contains the following three sections: "Test Scope", "Testing Communication", and "Stakeholders". The features of the test object to be tested and those excluded from the testing represent information that is:

A. usually included in a test plan and, in the given test plan, it is more likely to be specified within
"Testing Communication" rather than in the other two sections mentioned

B. usually included in a test plan and, in the given test plan, it is more likely to be specified within "Test Scope" rather than in the other two sections mentioned

C. not usually included in a test plan, and therefore in the given test plan it should not be specified neither within the three sections mentioned, nor within the others

D. usually included in a test plan and, in the given test plan, it is more likely to be specified within
"Stakeholders" rather than in the other two sections mentioned

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #2

Which of the following statements regarding the testing quadrants model is correct?

A. The testing quadrants model assigns tests from one of the four quadrants to each iteration in the Agile development.

B. The testing quadrants model provides a way of differentiating between types of tests and assists in explaining them to stakeholders.

C. The testing quadrants model assigns test types to the corresponding V-Model test levels.

D. With the testing quadrants model, tests can be either business-oriented or product-oriented.

Discussion 0

Correct Answer: B Vote an answer

Question #3

Which type of software development product can undergo static testing?

A. Static tests should be performed on the installation and user guide documents as these documents are used by the end user.

B. Any software development product can undergo static testing, including requirements specifications, design specifications and code.

C. Static testing is done only on the requirements You need to execute the software in order to find defects in the code.

D. Static testing is done only on the code as part of the "code review" sessions Other documents are reviewed, but not by static testing.

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #4

Which of the following is a typical product risk?

A. Low quality of the configuration data, test data and tests

B. Poor usability of the software

C. A problem in the code developed by a 3rd party

D. Problem in defining the right requirements

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #5

Consider the following testing levels:
1) Component Testing
2) Integration Testing
3) System Testing
4) Acceptance Testing
Which of the following statements is true?

A. Integration and system testing are applicable when V-model is used.
Component and acceptance testing are applicable when iterative development models are used.

B. Acceptance testing is applicable for all software development models.
Component and system testing are applicable only for the V-model.

C. All the testing levels are applicable to V-model for software development.
Only acceptance testing is applicable for iterative models.

D. All testing levels are applicable, independent of which software development life-cycle process (V- model. iterative, incremental) is used.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #6

Which of the following is MOST likely to be an example of a PROJECT risk?

A. A system architecture may not support some non-functional requirements

B. A computation is not always performed correctly in some situations

C. Specific modules do not adequately meet their intended functions according to the user

D. Team members' skills may not be sufficient for the assigned work

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #7

An alphanumeric password must be between 4 and 7 characters long and must contain at least one numeric character, one capital (uppercase) letter and one lowercase letter of the alphabet.
Which one of the following sets of test cases represents the correct outcome of a two-value boundary value analysis applied to the password length? (Note: test cases are separated by a semicolon)

A. aB11;99rSp:5NnN10;7iDD0a1x

B. 1RhT;rSp53;3N3e10;8sBdby

C. 1xA;aB11;Pq1ZZab;7iDD0a1x

D. 1xB: aB11: 99rSp: 5NnN10; 4NnN10T; 44ghWn19

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #8

A software system checks age in order to determine which welcome screen to display. Age groups are:
Group I: 0-12
Group II; 13-18
Group III: over 18
Which of the below represent boundary values?

A. (-1.0,11.12.13,14,18.19)

B. (4.5.15.20)

C. (0.12.13.18.19)

D. (-1.0.12.13.18,19)

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #9

Which ONE of the following options MOST ACCURATELY describes the activities of "testing" and
"debugging"?

A. Testing identifies a defect that is caused by an error in the software, whereas debugging is concerned with finding the causes of this defect, analyzing these causes, and eliminating them.

B. Testing triggers a defect that is caused by an error in the software, whereas debugging is concerned with finding the causes of this defect, analyzing these causes, and eliminating them.

C. Testing triggers a failure that is caused by a defect in the software, whereas debugging is concerned with finding the causes of this failure (defects), analyzing these causes, and reproducing them.

D. Testing triggers a failure that is caused by a defect in the software, whereas debugging is concerned with finding the causes of this failure (defects), analyzing these causes, and eliminating them.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #10

For each of the test cases to be executed, the following table specifies the priority order and dependencies on other test cases

Which of the following test execution schedules is compatible with the logical dependencies and allows executing the test cases in priority order?

A. TC4, TC3, TC2, TC6, TC1, TC5

B. TC4, TC6, TC3, TC2, TC5, TC1

C. TC3, TC5, TC6, TC1, TC4, TC3

D. TC4, TC3, TC2, TC6, TC5. TC1

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #11

Which is an advantage of using testers that are independent from the development team?

A. Independent testers support the developers with their feedback on coding rules and architecture design.

B. Independent testers will identify themselves more with the project and the project goals and have good relations with the development team.

C. Independent testers have a different perspective and can find defects that developers miss.

D. Developers can delegate their sense of responsibility for quality to testers.

Discussion 0

Correct Answer: C Vote an answer

Question #12

Which ONE of the following options BEST describes the purpose of confirmation testing versus regression testing?

A. The purpose of confirmation testing is to confirm that the defect giving rise to a failure has been successfully fixed. The regression test aims to ensure that no defects have been introduced or discovered in unmodified areas of the software as a result of the changes made.

B. Confirmation testing verifies all system requirements, while regression testing ensures that no additional test cases are needed.

C. Confirmation testing ensures the entire system functions as expected, whereas regression testing focuses only on modified components.

D. Regression testing and confirmation testing are interchangeable and serve the same purpose.

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #13

Which of the following statements best describes the value of maintaining traceability in software testing?

A. Traceability of test results to risks and residual expenditure helps evaluate requirements coverage.

B. Traceability helps to identify the root causes of failures and to set priorities for retest and regression testing.

C. Traceability helps to monitor project progress and assess the coverage.

D. Traceability helps to identify the root cause of defects and improve the quality of the software product.

Discussion 0

Correct Answer: C Vote an answer

Question #14

Which of the following statements about decision tables are TRUE?
I. Generally, decision tables are generated for low risk test items.
II. Test cases derived from decision tables can be used for component tests.
III. Several test cases can be selected for each column of the decision table.
IV. The conditions in the decision table represent negative tests generally.

A. II. Ill

B. I, IV

C. I. Ill

D. II. IV

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #15

Which of the following statements is the BEST example of non-functional testing?

A. Tests related to "what" the system should do

B. Tests which capture the time it takes to save a file

C. Tests based on the internal structure of a component or system

D. Tests which calculate overtime pay for those employees entitled to such

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Free ISTQB ISTQB-CTFL Practice Test & Real Exam Questions

Download Free ISTQB ISTQB-CTFL Demo