Free IBM P6040-009 Practice Test & Real Exam Questions

Exam Code/Number: P6040-009
Exam Name/Title: IBM SurePOS 300 Models 330 and 33H Technical Mastery Test (P6040-009)
Certification Provider: IBM
Corresponding Certification: Retail Store Solutions Technical Mastery

Exam Questions: 55
Updated On: Jun 03, 2026

Question #1

Which step describes the first recommended action that should be taken to gain access to the system components?

A. Loosen the thumb screw which holds the power supply in place

B. Remove the two screws at the top of the back of the unit

C. Slide the top cover back, then lift it up

D. Unplug the power cord

Discussion 0

Correct Answer: D Vote an answer

Question #2

What physically attaches the system board to the SurePOS 300 frame?

A. The power supply mounting screws

B. The riser card assembly bracket

C. The heat sink and fan assembly retainer screws

D. Six hex screws and the printer and serial port B connector

Discussion 0

Correct Answer: D Vote an answer

Question #3

When removing the CD-ROM drive from the system unit, in which order should the removal steps be performed?

A. 1. Disconnect the power and signal cables from the CD-ROM drive. 2. Open the unit. 3. While pressing the blue
latch toward the CD-ROM, lift out the CD-ROM with bracket. 4. While pulling the tab on the side of the CD-ROM
bracket outward, pull the bracket a

B. 1. Open the unit. 2. Disconnect the power and signal cables from the CD-ROM drive. 3. While pressing the blue
latch toward the CD-ROM, lift out the CD-ROM with bracket. 4. While pulling the tab on the side of the CD-ROM
bracket outward, pull the bracket a

C. 1. Open the unit. 2. Disconnect the power and signal cables from the CD-ROM drive. 3. While pulling the tab on
the side of the CD-ROM bracket outward, pull the bracket away from the CD-ROM. 4. While pressing the blue
latch toward the CD-ROM, lift out the

D. 1. While pulling the tab on the side of the CD-ROM bracket outward, pull the bracket away from the CD-ROM. 2.
Open the unit. 3. Disconnect the power and signal cables from the CDROM drive. 4. While pressing the blue latch
toward the CD-ROM, lift out the

Discussion 0

Correct Answer: B Vote an answer

Question #4

What tools are required to gain access to the system components?

A. Only a Phillips screwdriver

B. Flat blade screwdriver and spring hook

C. Phillips screwdriver and wrench

D. No tools are required

Discussion 0

Correct Answer: A Vote an answer

Question #5

Which three services does TechLine (formerly called PartnerLine) offer?

A. Configuration assistance

B. Placing orders

C. On-site installation and set up assistance

D. Locating Retail Store Solutions marketing and sales information via the Internet

E. Financing assistance

F. Product positioning information

Discussion 0

Correct Answer: A,D,F Vote an answer

Question #6

Which three cash drawers does the SurePOS 300 Models 330 and 33H support?

A. 12 volt compact cash drawer

B. 12 volt full-size cash drawer

C. 24 volt customer-supplied cash drawer

D. 24 volt full-size cash drawer

E. 12 volt customer-supplied cash drawer

F. 24 volt compact cash drawer

Discussion 0

Correct Answer: C,D,F Vote an answer

Download Free IBM P6040-009 Demo

Simply submit your e-mail address below to get started with our free demo of your IBM P6040-009 exam.