Free Huawei H12-323_V2.0 Practice Test & Real Exam Questions

Which of the following issues need to be considered and confirmed during signal coverage design in a WLAN planning project? (Choose all that apply.)

Export CAD drawings using WLAN Planner. Which of the following information can be included in the CAD drawings? (Multiple choice)

Wireless network capacity optimization needs to consider the service types and user models of customers in different scenarios, and provide customers with capacity optimization suggestions based on network construction standards. When a customer has 300 users accessing the existing network, the concurrency rate is 40%, the average bandwidth of a single user is 16Mbps, and the terminal bandwidth of the currently selected AP is 16 Tlbpsi, the number of concurrent terminals is 15, then in order to meet the capacity requirements, () APs need to be deployed in the area.

A customer's existing network uses Huawei wireless controller to deploy 802.1x authentication, and the authentication server is iMaster NCECampus.
Engineers found that the terminal always failed authentication during the wireless network debugging process. What are the possible causes of this problem? (Multiple choice)

In a WLAN network, during the key negotiation phase of WPA/WPA2-PSK authentication, PMK can be generated in two ways. When the pre-shared key is a string, the pre-shared key is PMK.

The AP calculator of the CloudCampus APP integrates various scenarios and network construction standards. Which of the following scenarios is not included?

In a VRRP hot backup scenario, which of the following situations will trigger a master-slave switch? (Multiple choice)

In WLAN network planning, signal coverage design is used to ensure that the signal strength within the coverage area of each area can meet user needs while solving interference problems between adjacent APs.
So according to the signal coverage design principles, engineers should consider the following when designing signal coverage? (Multiple choice)

In Huawei's terminal pull-out test solution, the pull-out test report can be exported through the CampusInsight platform.
Which of the following parameters can be used to select report exports on the CampusInsight platform? (Multiple choice)

Among the following WAC high-reliability networking methods, which ones require that the models and software versions of the active and standby WACs must be exactly the same?
(Multiple choice)

The Portal server template of a WAC is configured as follows, where ur refers to the access path for the client to access the Portal server.
[WAC-web-auth-server abc]
[WAC-web-auth-server-abc] server-ip 10.23.200.1
[WAC-web-auth-server- abcur] https://10.23.200.1:19008/porta

An engineer is using the CloudCampus app to perform coverage and service tests. The roaming experience test confirms that the coverage is good. The test results are shown in the figure.

The following is the engineer's interpretation of the roaming experience test results. Which items are correct? (Multiple choice)

In WLAN network optimization, you can use the CloudCampus APP to track the path that data takes to the destination address. This function is realized by the "test while walking" tool in business testing.

When an engineer was debugging a wireless network at a customer site, the radio frequency tuning function configured on the device did not take effect. The engineer checked the current radio frequency tuning status on the wireless controller, and the following was displayed. After analyzing the displayed information, which of the following may be the cause of the failure of radio frequency calibration?

The 615.802.1X authentication system uses the () protocol to implement information exchange between the client, access device and authentication server.