Free HP HPE6-A48 Practice Test & Real Exam Questions
Refer to the exhibit.
A network administrator wants to configure an 802.1x supplicamt for a wireless network that includes the following:
AES encryption
EAP-MSCHAP v2-based user and machine authentication
Validation of server certificate in Microsoft Windows 10
The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additonal Settings.
What must the network administrator do next to accomplish the task?
A network administrator wants to configure an 802.1x supplicamt for a wireless network that includes the following:
AES encryption
EAP-MSCHAP v2-based user and machine authentication
Validation of server certificate in Microsoft Windows 10
The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additonal Settings.
What must the network administrator do next to accomplish the task?
Correct Answer: B
Vote an answer
Refer to exhibit.
A company has a multiple Arua implementation with three different locations named Headquarter, Branch, and Telecommuters.
The network design includes the following:
Headquarter APs terminate at the Mobility Controller (MC) cluster and propagate Corporate, Guest, and Voice SSIDs
Branch APs terminate at the Branch Office Controller (BOC) and propagate Corporate and Voice SSIDs
BOC reaches the Mobility Master (MM) through a VPNC.
Telecommuter RAPs terminate at VPNC and propagate Corporate and Voice SSIDs.
The Corporate SSID on the RAPs is split-tunnel, all other SSIDs are tunnel.
The network design requires minimal AP group and VAP configuration effor, while preventing unnecessary VAP propagation to lower hierarchy levels.
Following Aruba node hierarchy desing recommendations, which group hierarchy design helps meet these requirements?
A company has a multiple Arua implementation with three different locations named Headquarter, Branch, and Telecommuters.
The network design includes the following:
Headquarter APs terminate at the Mobility Controller (MC) cluster and propagate Corporate, Guest, and Voice SSIDs
Branch APs terminate at the Branch Office Controller (BOC) and propagate Corporate and Voice SSIDs
BOC reaches the Mobility Master (MM) through a VPNC.
Telecommuter RAPs terminate at VPNC and propagate Corporate and Voice SSIDs.
The Corporate SSID on the RAPs is split-tunnel, all other SSIDs are tunnel.
The network design requires minimal AP group and VAP configuration effor, while preventing unnecessary VAP propagation to lower hierarchy levels.
Following Aruba node hierarchy desing recommendations, which group hierarchy design helps meet these requirements?
Correct Answer: C
Vote an answer
Refer to the exhibit.
A network administrator configures a Mobility Master (MM)-Mobility Controller (MC) solution and integrates it with AirWave. The network administrator configures the SNMP and terminal credentials in the MM and MC, and then monitors the mobility devices from AirWave, including Clarity for user association and basic network services verification. However, AirWave does not display any UCC data that is available in the MM dashboard.
Based on the information shown in the exhibit, which configuration step should the network administrator do next in the MM to complete the integration with AirWave?
A network administrator configures a Mobility Master (MM)-Mobility Controller (MC) solution and integrates it with AirWave. The network administrator configures the SNMP and terminal credentials in the MM and MC, and then monitors the mobility devices from AirWave, including Clarity for user association and basic network services verification. However, AirWave does not display any UCC data that is available in the MM dashboard.
Based on the information shown in the exhibit, which configuration step should the network administrator do next in the MM to complete the integration with AirWave?
Correct Answer: B
Vote an answer
A network engineer configures two controllers for VRRP. The engineer expects the status of the controllers to be master and backup, but notices that both controllers have statuses of master.
What is a possible reason?
What is a possible reason?
Correct Answer: C
Vote an answer
Refer to the exhibit.
A network administrator configures an Instant AP (IAP) to establish an Aruba IPSec tunnel across the Internet, and configures two DHCP pools for wireless users.
Based on the output shown in the exhibit, which device behaves as a DHCP server for the users?
A network administrator configures an Instant AP (IAP) to establish an Aruba IPSec tunnel across the Internet, and configures two DHCP pools for wireless users.
Based on the output shown in the exhibit, which device behaves as a DHCP server for the users?
Correct Answer: A
Vote an answer
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator deploys role-based tunneled node in a corporate network to unify the security policies enforcement. When users authenticate with 802.1X, ClearPass shows Accept results, and sends the HPE-User-Role attribute as expected. However, the switch always applies the denyall role.
Why does the switch fail to allocate the tunnel-employee role?
Exhibit 1
Exhibit 2
A network administrator deploys role-based tunneled node in a corporate network to unify the security policies enforcement. When users authenticate with 802.1X, ClearPass shows Accept results, and sends the HPE-User-Role attribute as expected. However, the switch always applies the denyall role.
Why does the switch fail to allocate the tunnel-employee role?
Correct Answer: C
Vote an answer
Refer to the exhibit.
Help desk staff receive reports from users that there is inefficient wireless service in a location serviced by AP20, AP21, and AP22, and open a ticket. A few hours later, the users report that there is a drastic improvement in service. The staff still wants to determine the cause of the problem so the next day thay start monitoring the tasks.
They access the Mobility Master (MM), and obtain the output shown in the exhibit.
What could be the cause of the problem that the users reported?
Help desk staff receive reports from users that there is inefficient wireless service in a location serviced by AP20, AP21, and AP22, and open a ticket. A few hours later, the users report that there is a drastic improvement in service. The staff still wants to determine the cause of the problem so the next day thay start monitoring the tasks.
They access the Mobility Master (MM), and obtain the output shown in the exhibit.
What could be the cause of the problem that the users reported?
Correct Answer: C
Vote an answer
A network engineer designs a network with these requirements:
HQ (master controller). Branch office-1 (local controller), and branch office-2 (local controller). Each site has a controller and they are all in the same controller cluster.
Employees at HQ should be mapped to VLAN 10 and 11.
Employees at Branch office-1 should be mapped to VLAN 20.
Employees at Branch office-2 should be mapped to VLAN 30.
All Access points are provisioned with the same configuration (AP-Group).
VAP-Employee is mapped with the VLAN name Employee.
Which configuration should be engineer recommend at Branch office-2?
HQ (master controller). Branch office-1 (local controller), and branch office-2 (local controller). Each site has a controller and they are all in the same controller cluster.
Employees at HQ should be mapped to VLAN 10 and 11.
Employees at Branch office-1 should be mapped to VLAN 20.
Employees at Branch office-2 should be mapped to VLAN 30.
All Access points are provisioned with the same configuration (AP-Group).
VAP-Employee is mapped with the VLAN name Employee.
Which configuration should be engineer recommend at Branch office-2?
Correct Answer: B
Vote an answer
