Free HP HPE0-S59 Practice Test & Real Exam Questions, Page 1

Question #1

Which statement about the HPE D3940 storage module is true?

A. SATA drives require redundant IO adapters to be installed in this module.

B. Up to five modules can be installed in a single frame with Gen10 servers.

C. It is configured through CLI available from HPE Synergy console.

D. Only one type of drives (SATA, SAS, SSD) can be installed in each module.

Discussion 0

Correct Answer: B Vote an answer

Question #2

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has the appropriate storage controller installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that the compute nodes cannot access the storage module.
What will you verify first when troubleshooting this problem?

A. If the D3940 storage module is properly licensed through the HPE OneView interface.

B. If the D3940 module is imported in a managed state that allows volume provisioning.

C. If there is at least one iSCSI network configured that will provide access to the module.

D. If the SAS logical interconnect is a part of the logical enclosure and has a healthy state.

Discussion 0

Correct Answer: D Vote an answer

Question #3

Refer to Exhibit:

Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?

A. Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.

B. Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.

C. It is possible to update this logical interconnect without network downtime if orchestrated method is used.

D. Only the manual orchestration method will allow a firmware upgrade without causing network downtime.

Discussion 0

Correct Answer: C Vote an answer

Question #4

Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?

A. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.

B. If properly cabled, any compute node can access any HPE D3490 storage module

C. To manage 15 frames, additional HPE Composers are required.

D. The customer must create at least five logical enclosures for this setup.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #5

Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

A. LLDP tagging

B. Pause flood protection

C. Loop protection

D. Storm control

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #6

Which challenge does distributed training with model parallelization address?

A. Accelerating experimentation on servers with multi-core processors

B. Fine-tuning models when data scientists are unsure which pretrained model will work best for their use case

C. Training very large models that cannot fit on a single GPU

D. Avoiding drift by training multiple different models that check each other ' s results

Discussion 0

Correct Answer: C Vote an answer

Question #7

Refer to the exhibit.

Which statement about this logical JBOD is true?

A. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created

B. This logical JBOD can be connected to multiple systems to formulate a snared datastore.

C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done

D. This logical JBOD can be presented to the compute nodes in a different frame.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #8

What is a limitation when creating a server profile?

A. Administrator cannot define more than 8 connections within a server profile

B. ILO management is limited to the integration with Active Directory or LDAP

C. BIOS settings can be changed only when UEFI optimized is selected as boot mode

D. It is not possible to create shared volumes on demand through a server profile

Discussion 0

Correct Answer: C Vote an answer

Question #9

Match HPE Superdome Flex system with its specific feature.

Discussion 0

Correct Answer:

Explanation:
Here are the correct matches for each HPE Superdome Flex system with its respective feature:
* HPE Superdome Flex
* Support for 32 sockets and 48TB of memory
* Support for nPar with 16 sockets
* HPE Superdome Flex 280
* Maximum of 24TB memory
* Minimum of 768 GB of memory
* HPE Superdome Flex:
* Support for 32 sockets and 48TB of memory: The HPE Superdome Flex system is designed for extremely large-scale workloads and can support configurations with up to 32 CPU sockets and
48TB of memory.
* Support for nPar with 16 sockets: This system supports nPartitions (nPars) with configurations that can include up to 16 CPU sockets, providing flexible partitioning and resource allocation.
* HPE Superdome Flex 280:
* Maximum of 24TB memory: The HPE Superdome Flex 280 supports a maximum memory capacity of 24TB, suitable for large but not as massive workloads compared to the full Superdome Flex.
* Minimum of 768 GB of memory: The minimum memory configuration for the HPE Superdome Flex 280 is 768 GB, ensuring a base level of performance and capacity for smaller deployments.
Reference: HPE Superdome Flex QuickSpecs

Question #10

Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

A. HPE OneView Update Readiness Checker

B. HPE OneView Firmware Compliance Report

C. HPE OneView Global Dashboard

D. HPE Composer Maintenance Console

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #11

Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. For the given downlink speed, the maximum number of frames is reached

B. Both master modules are located in the same HPE Synergy frame

C. The master modules are located in the interconnect bays 2 and 5

D. To use interconnect bay set 3, all compute nodes must be half-height

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #12

Which statement about the HPE Synergy Image Streamer is true?

A. Image Streamer is used to deploy OS images to the internal disks of compute modules.

B. Image Streamer is responsible for the configuration of network settings across Synergy frames.

C. Image Streamer can manage OS images, firmware, and drivers across multiple frames.

D. Image Streamer can manage firmware and driver baselines across multiple frames.

Discussion 0

Correct Answer: C Vote an answer

Question #13

An admin has found that an update is available for an HPE Private Cloud Al solution ' s Private Cloud Al software. Before the admin can install the update, which step is required?

A. Downloading the desired software to each node in the HPE Private Cloud Al solution

B. Manually placing the Al optimized workers in maintenance mode

C. Running a precheck on the desired new software catalog

D. Updating the HPE GreenLake for File Storage software to a supported version for the desired software catalog

Discussion 0

Correct Answer: C Vote an answer

Question #14

What is one way cross-stack analytics in HPE GreenLake cloud reduces alert fatigue?

A. It uses peer training to analyze typical behavior and determine when an alert is warranted.

B. It only escalates alerts related to rare issues and automatically remediates all other alerts.

C. It automatically suppresses information-only alerts to limit the number of alerts sent to network admins.

D. It coordinates alert notification with the HPE support team, reducing the number of alerts the customer has to review.

Discussion 0

Correct Answer: A Vote an answer

Free HP HPE0-S59 Practice Test & Real Exam Questions

Download Free HP HPE0-S59 Demo