Free Dell DSDSC-200 Practice Test & Real Exam Questions
An engineer needs to configure a server.
The server is connected to a Storage Center via iSCSI using or more hardware iSCSI host bus adapters.
If connectivity is lost due to controller failover, the server needs to reconnect to the Storage Center iSCSI target ports.
Which HBA feature must be enabled to meet the requirement?
The server is connected to a Storage Center via iSCSI using or more hardware iSCSI host bus adapters.
If connectivity is lost due to controller failover, the server needs to reconnect to the Storage Center iSCSI target ports.
Which HBA feature must be enabled to meet the requirement?
Correct Answer: D
Vote an answer
A customer has an 8 TB database. Half of the data is hot with very frequent access The other half of the data is older, infrequently used cold data The customer buys (12) 800 GB
SLC Solid State Drives, and puts them in a new disk folder called "Database" The customer then creates volumes for this database in the Database disk folder using the recommended storage profile.
After this database has been running for 1 month, the Statistics tab for the database volumes shows 100% of the space is on Tier 1. The customer expected that half of the data would be on Tier 1 and the rest moved to lower tiers.
What is the problem?
SLC Solid State Drives, and puts them in a new disk folder called "Database" The customer then creates volumes for this database in the Database disk folder using the recommended storage profile.
After this database has been running for 1 month, the Statistics tab for the database volumes shows 100% of the space is on Tier 1. The customer expected that half of the data would be on Tier 1 and the rest moved to lower tiers.
What is the problem?
Correct Answer: C
Vote an answer
An engineer needs to configure a VMware host. According to best practice, the engineer needs to enable a feature by changing the variables QFullSampleSize and QFullThreshold.
The engineer sets those two parameters to the value of 0 in VMware ESXi 5.1 Patch 1 and later versions.
Which feature is enabled?
The engineer sets those two parameters to the value of 0 in VMware ESXi 5.1 Patch 1 and later versions.
Which feature is enabled?
Correct Answer: D
Vote an answer
Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).
Which two steps should the engineer take prior to racking any equipment? (Choose two.)
Correct Answer: A,B
Vote an answer
Ail engineer has several servers connected to the Storage Center through two FC fabrics.
The Storage Center runs m Legacy mode. The engineer needs to create zones based on
World Wide Names (WWN).
Which WWNs from the Storage Center need to be included in the zone with the server
WWN?
The Storage Center runs m Legacy mode. The engineer needs to create zones based on
World Wide Names (WWN).
Which WWNs from the Storage Center need to be included in the zone with the server
WWN?
Correct Answer: A
Vote an answer
A customer has mapped a volume to a ESX server using two 8 Gb Fibre Channel (FC) paths. The customer needs the traffic to split equally across the two FC paths.
Which ESX Multi-pathing policy should be used?
Which ESX Multi-pathing policy should be used?
Correct Answer: D
Vote an answer
Which three tasks can be performed using the Compellent vSphere plugin in the vSphere client? (Choose three.)
Correct Answer: E
Vote an answer
