Free Cisco 300-615 Practice Test & Real Exam Questions, Page 1

Question #1

Refer to the exhibit. VSAN traffic is not routed as expected. Which action should be taken to resolve the issue?

A. Configure the hello timer to match the neighbor

B. Configure the FSPF dead interval with a value higher than 80 seconds

C. Reset the error packet counter

D. Reset the inactivity timer on switch-2

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #2

Refer to the exhibit.

The OTV overlay is deployed in multicast mode. After an unexpected reload of N7K-SITE1-OTV1, the network administrator observed that on N7K-SITE1-OTV2 the OTV site adjacency went into the partial state.
Which
action resolves the issue?

A. Enable IP IGMP version 3 on the join interface on N7K-SITE1-OTV1.

B. Modify the multicast data-group on N7K-SITE1-OTV1 to match N7K-SITE1-OTV2.

C. Change the Site-VLAN on N7K-SITE1-OTV2 to VLAN 1.

D. Configure the Site-Identifier on N7K-SITE1-OTV1 to 0002.0002.0002.

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #3

Refer to the exhibit.

An engineer discovers that if the vPC peer link goes down, half of the devices in VLAN 20 experience connectivity issues with the external networks Which action resolves the issue?

A. Configure a dedicated Layer 3 link between vPC peers

B. Exclude the non-vPC VLANs from vPC peer link

C. Add the non-vPC SVIs in the dual-active exclude VLAN list

D. Allow non-vPC VLANs on a second trunk between the two vPC peers

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #4

A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)

A. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.

B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.

C. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices.

D. Disable first-hop redundancy.

E. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch.

Discussion 0

Correct Answer: B,D Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #5

Refer to the exhibit.

A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?

A. Reload the switch.

B. Enable ISSD after the downgrade is complete.

C. Roll back to the original image.

D. Shut and no shut the interfaces to the FEX.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #6

Refer to the exhibit.

An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?

A. Set the OSPF media type to point-to-point.

B. Adjust the MTU on Router-A to 1600.

C. Disable the check of the MTU value.

D. Adjust the MTU on Router-B to 1604.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #7

Refer to the exhibit.

The integration between Cisco UCS Manager and Cisco UCS Central failed. Which action resolves the issue?

A. Configure the certificate between the appliances

B. Implement the consistent NTP source between the appliances

C. Implement the connectivity between the appliances through a firewall

D. Configure the shared secret key between the appliances

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #8

The script fails to convert a JSON variable into a Python dictionary. Which action resolves the issue?

A. Define a json_output as a YAML object, yaml json_output

B. Use a json.dumps(json_output) function

C. Fix the JSON syntax by modifying "attribures" to "attribures":

D. Invoke a function yaml.loads(json._output ,decoder_"json")

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #9

An engineer is recovering a fabric interconnect from a failed upgrade. The engineer booted the fabric interconnect to the switch(boot)# prompt and copied all the required images. Which image must be linked to nuova-sim-mgmt-nsg.O. 1.0.XXXXXXXXX1 bin to make the management image compliant with the Cisco UCS Manager?

A. UCS Manager

B. Cisco IMC

C. Kickstart

D. System

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #10

Refer to the exhibit.

An engineer installed a UCS rack mount server and received this error after upgrade. Which action resolves the issue?

A. Copy the license file to the kernel module folder.

B. Enable disabled Ethernet ports.

C. Install the license on the fabric interconnect.

D. Regenerate the modules map file.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #11

Refer to the exhibit. A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met. Which action resolves the issue?

A. Append action 2.0 event-default to the script

B. Modify cli match "conf t" to "snmp match "conf t"

C. Append action 2.0 cli "conf t" to the script

D. Modify snmp-trap strdata "Configuration changed" to syslog msg Configuration changed

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #12

An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

A. B . Reset the faulty module from the peer IOM

B. C . Reinstall the firmware using Auto Install .

C. D . Restore the Cisco UCS Manager configuration from backup .

Discussion 0

Correct Answer: B Vote an answer

Question #13

Refer to the exhibit.

A network engineer finds one of the fabric interconnects offline when connecting L1 and L2 ports on both fabric interconnects. Which action resolves the issue?

A. 1. Connect Fabric Interconnect B and change the role to primary.
2. Reboot Fabric Interconnect B.
3. Add the Fabric Interconnect A as subordinate fabric to the cluster.

B. 1. Connect Fabric Interconnect B and execute "Erase configuration"
2. Reboot Fabric Interconnect B.
3. Add the subordinate Fabric Interconnect to the cluster.

C. 1. Connect to Fabric Interconnect A.
2. Verify the cluster status and HA election.
3. Validate Fabric Interconnect A hardware issues.

D. 1. Connect to Fabric Interconnect B.
2. Verify the cluster status and HA election.
3. Validate Fabric Interconnect B hardware issues.

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Question #14

Refer to the exhibit.

The scheduler was configured to save the running-config automatically daily. However, the scheduler is returning the error presented. Which action resolves the issue?

A. Remove vrf management from the command

B. Change the file transfer protocol to TFTP in scheduler job

C. Use the kstack attribute for copying the configuration file

D. Reconfigure the scheduler using the admin user

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).

Free Cisco 300-615 Practice Test & Real Exam Questions

Download Free Cisco 300-615 Demo