Free Cisco 300-610 Practice Test & Real Exam Questions

An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.
Which tool meets these requirements?

An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

An engineer working for a telecommunication company with an employee ID:458:138:642 is evaluating the use of broadcast, unknown unicast, multicast replication modes for a VXLAN EVPN network. The engineer must leverage a pure unicast-based underlay network with the requirement to have multicast forwarding in the overlay. Which method must be used to achieve this task?

Which programming model is vendor-agnostic and uses separate containers or models for operational and configuration data?

A large financial institution hosts all customer data in a critical data center with a single physical location. Top management is concerned about the risk of a single-site failure, but budget is also an issue, so the network engineering team is working to implement a cost-effective redundancy strategy with a second data center. The new data center must use a three-tier design identical to the existing data center. Business requirements dictate that all data must always be accessible from anywhere in the world, even if a single site fails. The team purchased two Cisco Nexus 7700 Series Switches and four Catalyst 8000 Series Routers. Which action must the team take to accomplish the goal?

A storage administrator experiences a slow file transfer rate when archiving backup files on a tape library drive. The tape drive is connected directly to the Cisco Nexus 7009 switches. The file transfer rate gradually goes down with files that are over 100 GB in size. The requirement is for the file transfer rate to be consistent during the transfer window. Which two solutions meet this requirement? (Choose two.)

After experiencing traffic disruptions from the failure of a single router, a customer asks an engineer to design a solution that will prevent this from occurring in the future. While examining the customer's environment, the engineer discovers that the routers are manufactured by a variety of different vendors, and they have varying amounts of CPU and memory resources.
Additionally, several of the customer's applications require the ability to fine-tune the load- balancing parameters between multiple gateway routers.
Which solution should be used to meet these requirements?

Refer to the exhibit. A Cisco engineer is configuring an active/active design that consists of Cisco Nexus 7000 Series Switches with Fabric Extenders using a vPC. The desired outcome is to allow the connection of servers/storage/devices to a single FEX, and use the FEX port channels to each parent switch to provide redundancy. The engineer configures FEX and FEX ID to be identical on both sides. During initial tests, an issue occurs with the straight-through FEX and active/active FEX configuration. What is the most probable reason?

An engineer needs to design a network environment in a data center that uses Cisco Nexus 9000 Series Switches The solution must meet these requirements:
- interoperate with 802.1D devices
- load-balance spanning-tree traffic
- interoperate with third-party devices
Which spanning-tree protocol meets these requirements?

A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure. To cut operating costs, the client's data center is shared with other organizations.
The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server.
Which two policies must be used to meet these requirements? (Choose two.)

A Cisco engineer is preparing a service profile template for a design, which consists of 20 x UCS B200M6 blade servers, 2 x UCS 6454 Fabric Interconnect in End Host Mode, and 3 x UCS 5108 server chassis with 2408 Fabric Extenders. The blade servers are equipped with VIC 1480 adapters. The engineer does not configure a vNIC/vHBA placement policy in the service profile and the vNICs and vHBAs are assigned to the vCon in a particular order. What is the mapping scheme in which Cisco UCS assigns the vCons based on the type of server and the selected virtual slot?

Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?

An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes.
Which solution should be implemented in the design?

An engineer must design a Cisco UCS environment that will connection to a storage area network. The solution must include support for these conditions:
- connectivity to the existing 10 Gigabit Ethernet network
- booting the server infrastructure from the network
- integration with the existing Fibre Channel storage arrays
- lossless data transfer
Which solution should be used to meet these requirements?