Free Cisco 300-110 Practice Test & Real Exam Questions

An engineer is designing a wireless solution for a corporate campus which includes two primary buildings:
Research and Operations. The design must ensure seamless mobility for employees moving between buildings, support uninterrupted connectivity for real-time applications, and facilitate efficient Layer 2 and Layer 3 roaming. Each building ' s 9800-80 WLC manages its local APs, and the solution must support 802.11 r/k/v while maintaining an effective mobility control plane. Which design approach leverages Cisco mobility group architecture to meet the requirements?

An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm.
Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?

An engineer must design and configure a wireless network for pervasive coverage in an oil terminal, casual web and email traffic, 5 GHz. What is the best design?

A customer has an existing wireless network with a Cisco 9800 WLC high availability cluster and Cisco 9120 APs. The customer asks an engineer to perform a post wireless survey that includes a list of any non-802.11 devices on the 5 GHz band. The engineer performs the survey using an 802.11a/b/g/n/ac/ax WLAN adapter but did not use a spectrum analyzer. Which approach meets the requirements?

An engineer must perform a predictive design for a wireless network. The customer has devices that can tolerate at most 100 ms of delay when roaming. Which design criteria must be used?

Which issue occurs when wireless access points transmit by using the highest power level in a building that has brick walls?

A customer has a single anchor WLC named Anchor A. Anchor A is in a DMZ and provides guest access.
The customer wants to deploy an additional anchor controller named Anchor B to provide redundancy if Anchor A fails. Which design approach should be taken for the guest WLAN priority on the foreign WLC for each anchor WLC?

A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment. Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)

A consultant must design a WLAN for a large campus with high AP density, 50-100 clients per cell, 5 Mbps throughput per client minimum, 5 GHz and 2.4 GHz coverage at -67 dBm, and no 802.11b clients. Which two WLAN design approaches meet the requirements? (Choose two.)

A community bank has three campus locations and one HQ with the data center. Each campus has four Cisco Catalyst 9120 APs. Poor WAN uplinks cause impacted connectivity back to HQ, and each campus is planned to have its own EWC controller based on C9120 AP to keep traffic local. Guest WLAN will be routed locally.
Employee WLAN must be authenticated 802.1x PEAP via HQ ISE but can pass traffic locally once authenticated. HQ WLC will be the primary backup WLC for each WLC. Which design approach should the consulting engineer take?