Free Cisco 300-110 Practice Test & Real Exam Questions

A customer requires the wireless network to perform real-time analysis to reduce congestion, link usage, and infrastructure upgrades. Which Cisco technology can accomplish this analysis?

A university lecture hall has a Cisco wireless high-density network with this configuration: * 5 GHz only * 20- MHz channels * UNII-1, UNII-2, and UNII-2E channels * TPC minimum = 8 * TPC maximum = 14 The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas. Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?

An engineer is deploying new APs to serve IEEE 802.11g through 802.11ac clients and wants to use the Ekahau Site Survey tool to verify RF coverage. Management wants the engineer to verify and create coverage maps as quickly as possible. Which configuration accomplishes the goal?

A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?

A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?

A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices.
The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?

An engineer is implementing a wireless design for a manufacturing company with a Catalyst 9800, a stack of two Catalyst 9300-48HX switches, and 9166 APs. Each AP must be named using the Zone-053424189-01X string where X is the area number. The engineer needs to connect the APs to the switch stack using PoE. How many APs must the engineer connect to the stack so that they run with full functionality?

A wireless engineer must design a backhaul link. The engineer has a mesh access point that has a wired connection back to the infrastructure. What must be changed in the AP role before a change is made in the AP mode?

A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?

A wireless engineer is using Ekahau site survey to validate that an existing wireless network is operating as expected. Which type of survey should be used to identify end-to-end network performance?