Free BICSI RCDDv15 Practice Test & Real Exam Questions

Exam Code/Number: RCDDv15
Exam Name/Title: BICSI Registered Communications Distribution Designer - RCDD v15
Certification Provider: BICSI
Corresponding Certification: BICSI Certification

Exam Questions: 320
Updated On: Jul 07, 2026

Question #71

Which two of the following may the ICT distribution designer need to provide in order to identify the BEST solutions for the client's need? (Select two options.)

A. Recommendations for label design of outlets

B. Documentation plan

C. Preliminary budget numbers

D. Time constraints and/or milestones

E. Color scheme for dropcables

Discussion 0

Correct Answer: C,D Vote an answer

Question #72

An ICT distribution designer is designing a backbone cabling network that is specified for a campus network including several links approaching 2000 m (6562 It) and data rates of 100 Gb/s
What optical fiber type(s) should be used?

A. OM3 fiber

B. Both OS2 and OM3 fiber

C. Both OS1 and OS2 fiber

D. OM4 fiber

Discussion 0

Correct Answer: B Vote an answer

Question #73

Which two of the following roles do an ICT distribution designer use to ensure a timely and cost-effective telecommunications construction project? (Select two options.)

A. Assist in the resolution of unforeseen conditions, change orders RFIs and changes to the project's critical path.

B. Ensure the construction materials are stored properly and protected from theft.

C. Coordinate electrical supply so it is available in advance of the starting of contractor work.

D. Discuss design concerns with inspectors. AHJs, and other stakeholders.

E. Verify that the overall physical security design complies with the owner expectations.

Discussion 0

Correct Answer: A,D Vote an answer

Question #74

The above performance report shows the earned value (EV) analysis for a program.

The program director performs a high-level analysis and must present a summary narrative to the steering committee.
What do the current findings show?

A. The overall program is performing within an acceptable level of variance

B. Project C is running behind schedule and is over budget, projects A, B and D are on schedule

C. Project A is running behind schedule and is over budget projects B,C and D are on schedule

D. Project A is running ahead of schedule and is under budget projects B, C and D are behind schedule

Discussion 0

Correct Answer: C Vote an answer

Question #75

For a six story building (plus a basement) each of the six floors has a useable area of =3716 m2 (40.000 ft2) There are two riser systems, each serving halt of the useable area on each Moor What are the sleeves quantity and configuration required from fifth floor to sixth floor?

A. Three sleeves

B. Five sleeves

C. Four sleeves

D. Two sleeves

Discussion 0

Correct Answer: C Vote an answer

Question #76

Alter a company's senior executive management meeting the CEO issues a mandate to automate a new-client on-boarding process that would effectively eliminate the current manual paper-based process. The assigned program sponsor selects a program manager
Both the program sponsor and the program manager must ensure that the program charier contains which of the following?

A. Justification, benefits management plan, scope, and resources needed

B. Justification, benefits management plan, program business case and stakeholder considerations

C. Justification, benefits strategy scope and resource management plan

D. Justification, outcomes, scope, and stakeholder considerations

Discussion 0

Correct Answer: A Vote an answer

Question #77

A MINIMUM separation distance of 305 mm (12 in) between telecommunication cables and power cables with EMI exceeding 5 kVA is acceptable in which of the following cases?

A. Power cables are unshielded, while telecommunication cables are enclosed in a grounded metal conduit pathway.

B. Power cables are unshielded and enclosed in a grounded metal conduit, while telecommunication cables are enclosed in a grounded metal conduit pathway.

C. Power cables are unshielded, while telecommunication cables are enclosed in a non-metal conduit pathway.

Discussion 0

Correct Answer: B Vote an answer

Question #78

Based on the estimated work area size, what is the MAXIMUM number of work areas that a telecommunications enclosure shall serve?

A. 26

B. 40

C. 20

D. 32

E. 36

Discussion 0

Correct Answer: D Vote an answer

Question #79

Using an earth ground resistance tester, what is the recommended MAXIMUM value for resistance between any two points along the entire length of a bonding or grounding conductor (not including the earth electrode system)?

A. 1 ohm

B. 2 ohms

C. 0.50 ohm

D. 0.10 ohm

E. 0.25 ohm

Discussion 0

Correct Answer: A Vote an answer

Question #80

An IT-related program has a critical team in a region experiencing a crisis. Due to uncertainty about the region's changing environment a company's senior leadership asks the program manager to decrease dependencies on the critical team that should the program manager do to mitigate the Impacts of this request?

A. Revisit the program management plan to clearly identify how decreasing critical team dependencies will impact component projects

B. Update the procurement management plan, and begin the request for proposal (RFP) process to replace the critical team by staff augmentation

C. Meet with the steering committee to request assistance and influence in obtaining additional resources

D. Level resources, and empower the critical team to complete its work before regional instability impacts its efforts

Discussion 0

Correct Answer: A Vote an answer

Question #81

A new program is comprised of four component projects. The program manager must assign project managers to each of the tour projects. There are eight potential project managers to consider.
What should the program manager do before assigning the project managers?

A. Interview each project manager to determine their career aspirations

B. Determine budgetary constraints related to the project managers' salaries

C. Evaluate the project managers' skills and match them to the needs of the projects

D. Request performance feedback from the project managers' line managers

Discussion 0

Correct Answer: C Vote an answer

Question #82

What is the RECOMMENDED bend radius of a conduit with an internal diameter of 51 mm (2 in)?

A. 406 mm (16 in)

B. 203 mm (8 in)

C. 508 mm (20 in)

D. 305 mm (12 in)

Discussion 0

Correct Answer: D Vote an answer

Question #83

What is the derating factor for a 24 AWG (0.51 mm) stranded cords?

A. 10%

B. 20%

C. 30%

D. 60%

E. 50%

Discussion 0

Correct Answer: B Vote an answer

Question #84

A program manager has a multiple-project program that is scheduled to be completed by year's end. During the program delivery phases of the protects several mandatory changes are identified that would extend the program's completion date
What is the next step for the program manager?

A. Update the schedule to reflect the extended completion date

B. Apply resource leveling to ensure the program is completed on schedule

C. Adjust working hours to ensure the program is completed on schedule

D. Submit a change request to extend the program schedule

Discussion 0

Correct Answer: D Vote an answer

Download Free BICSI RCDDv15 Demo

Simply submit your e-mail address below to get started with our free demo of your BICSI RCDDv15 exam.