Free HP HPE7-A02 Practice Test & Real Exam Questions

An admin has configured an AOS-CX switch with these settings:
port-access role employees
vlan access name employees
This switch is also configured with CPPM as its RADIUS server.
Which enforcement profile should you configure on CPPM to work with this configuration?

The following firewall role is configured on HPE Aruba Networking Central-managed APs:
wlan access-rule employees
index 3
rule any any match 17 67 67 permit
rule any any match any 53 53 permit
rule 10 5 5.0 255.255 255.0 match any any any deny
rule 10.5 0.0 255.255 0.0 match 6 80 80 permit
rule 10.5 0.0 255.255.0.0 match 6 443 443 permit
rule 10.5.0.0 255.255.0.0 match any any any deny
rule any any match any any any permit
A client has authenticated and been assigned to the employees role. The client has IP address
10.2.2.2. Which correctly describes behavior in this policy?

You want to examine the applications that a device is using and look for any changes in application usage over several different ranges. In which HPE Aruba Networking solution can you view this information in an easy-to-view format?

A company already uses HPE Aruba Networking ClearPass Policy Manager (CPPM) as the RADIUS server for authenticating wireless clients with 802.1X. Now you are setting up 802.1X on AOS-CX switches to authenticate many of those same clients on wired connections. You decide to copy CPPM's wireless 802.1X service and then edit it with a new name and enforcement policy. What else must you change for authentication to work properly?

A company has AOS-CX switches and HPE Aruba Networking ClearPass Policy Manager (CPPM). The company wants switches to implement 802.1X authentication to CPPM and download user roles.
What is one task that you must complete on the switches to support this use case?

A company assigns a different block of VLAN IDs to each of its access layer AOS-CX switches.
The switches run version 10.07. The IDs are used for standard purposes, such as for employees, VolP phones, and cameras. The company wants to apply 802.1X authentication to HPE Aruba Networking ClearPass Policy Manager (CPPM) and then steer clients to the correct VLANs for local forwarding.
What can you do to simplify setting up this solution?

The security team needs you to show them information about MAC spoofing attempts detected by HPE Aruba Networking ClearPass Policy Manager (CPPM).
What should you do?

A company is using HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI). CPDI and CPPM are integrated. The security staff wants you to show them a list of all devices that are contacting a specific known command-and- control center.
What should you do?

Refer to Exhibit. All of the switches in the exhibit are AOS-CX switches. What is the preferred configuration on Switch-2 for preventing rogue OSPF routers in this network?

A company wants to use HPE Aruba Networking ClearPass Onboard to issue certificates to BYOD devices. These certificates should be valid only for authenticating the company's ClearPass cluster.
What type of Onboard CA should you set up?

A company has AOS-CX switches and HPE Aruba Networking ClearPass Policy Manager (CPPM). The company wants switches to implement 802.1X authentication to CPPM and download user roles. What is one task that you must complete on CPPM to support this use case?

You have configured an AOS-CX switch to use UBT with a UBT reserved VLAN. Some wired clients will be assigned to a role with this configuration:
port-access role contractors
gateway zone myzone gateway-role contractors-gw
You want to assign these clients to VLAN 42.
Where do you configure that VLAN assignment?

What correctly describes an HPE Aruba Networking AP's Device (TPM) certificate?

You are helping an organization deploy HPE Aruba Networking SSE. What is one reason to recommend that the company install agents on remote users' devices?