Free EMC D-VXR-OE-23 Practice Test & Real Exam Questions
SIMULATION
During a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is required to be enabled so the node can be correctly identified in the physical rack.
Use the simulator to enable the System LED for the node.
During a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is required to be enabled so the node can be correctly identified in the physical rack.
Use the simulator to enable the System LED for the node.
Correct Answer:
See the step by step solution in the Explanation below
Explanation:
To enable the system LED on vcluster730-esx03.edu.local for identification in the physical rack, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to the Host:
In the vSphere Client interface, navigate to the Hosts and Clusters view.
Expand the VxRail-DC and then the VxRail-Cluster.
Select the host named vcluster730-esx03.edu.local.
Access Host Actions:
Right-click on vcluster730-esx03.edu.local.
From the context menu, select Actions.
Enable System LED:
In the Actions menu, locate and select Enable LED or Turn On Locator LED (the exact wording might vary).
Confirm the action if prompted.
Verify LED Activation:
Check the physical rack to ensure that the system LED on vcluster730-esx03.edu.local is enabled and the node is easily identifiable.
Reference:
VMware vSphere Host Management Guide: vSphere Host Management
Note: The exact steps to enable the LED might vary slightly based on the version of vSphere Client you are using, but the general process involves selecting the host and using the Actions menu to enable the system LED.
Explanation:
To enable the system LED on vcluster730-esx03.edu.local for identification in the physical rack, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to the Host:
In the vSphere Client interface, navigate to the Hosts and Clusters view.
Expand the VxRail-DC and then the VxRail-Cluster.
Select the host named vcluster730-esx03.edu.local.
Access Host Actions:
Right-click on vcluster730-esx03.edu.local.
From the context menu, select Actions.
Enable System LED:
In the Actions menu, locate and select Enable LED or Turn On Locator LED (the exact wording might vary).
Confirm the action if prompted.
Verify LED Activation:
Check the physical rack to ensure that the system LED on vcluster730-esx03.edu.local is enabled and the node is easily identifiable.
Reference:
VMware vSphere Host Management Guide: vSphere Host Management
Note: The exact steps to enable the LED might vary slightly based on the version of vSphere Client you are using, but the general process involves selecting the host and using the Actions menu to enable the system LED.
Where are the VxRail Manager backup files located after they are created?
Correct Answer: A
Vote an answer
Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).
What authorization method is used tor VxRail API calls?
Correct Answer: C
Vote an answer
Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).
A VM is configured with hard disks totaling 100 GB allocated The VM is using a RAID 5 vSAN Storage Policy What is the total space that is consumed on the vSAN Datastore?
Correct Answer: C
Vote an answer
Explanation: Only visible for Pass4Leader members. You can sign-up / login (it's free).
SIMULATION
An existing 4-node VxRail standard cluster has to be scaled out with 2 additional nodes and configured as a stretched cluster. An administrator must prepare a vSAN storage policy that should have the following:
- vSAN Policy Name: vSAN
Stretched Cluster
- Data protection across the sites
- Local protection: RAID-1 with
FTT=1
- Thick Provisioning
An administrator should be able to provision a VM even if the currently available cluster resources cannot satisfy the current policy.
Use the simulator to create the required vSAN storage policy.
An existing 4-node VxRail standard cluster has to be scaled out with 2 additional nodes and configured as a stretched cluster. An administrator must prepare a vSAN storage policy that should have the following:
- vSAN Policy Name: vSAN
Stretched Cluster
- Data protection across the sites
- Local protection: RAID-1 with
FTT=1
- Thick Provisioning
An administrator should be able to provision a VM even if the currently available cluster resources cannot satisfy the current policy.
Use the simulator to create the required vSAN storage policy.
Correct Answer:
See the step by step solution in the Explanation below
Explanation:
To create the required vSAN storage policy in the vSphere Client for a VxRail stretched cluster, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to Storage Policies:
From the home screen, go to Policies and Profiles in the left-hand navigation pane.
Click on VM Storage Policies.
Create a New Storage Policy:
Click Create VM Storage Policy.
Enter the name as vSAN Stretched Cluster.
Click Next.
Configure Policy Rules:
In the Policy Structure section, choose Enable tag-based placement rules if needed.
Click Next.
Add vSAN Rules:
In the Storage Compatibility section, click Add rule and select vSAN.
Configure the following:
Primary level of failures to tolerate (PFTT): 1 failure - RAID 1 (Mirroring) Secondary level of failures to tolerate (SFTT): 1 failure - RAID 1 (Mirroring) Failures to Tolerate: 1 Provisioning type: Thick Provisioning Ensure "Force Provisioning" is enabled. This allows the VM to be provisioned even if the current resources do not satisfy the policy.
Set Data Services:
Skip the Data Services section if not applicable.
Click Next.
Review and Finish:
Review the policy settings.
Click Finish to create the storage policy.
Apply the Storage Policy to VMs:
Navigate to the VMs section.
Select the VMs that need the new storage policy.
Right-click and select VM Policies > Edit VM Storage Policies.
Choose the vSAN Stretched Cluster policy for the applicable disks.
Reference:
VMware vSAN Storage Policy Creation Guide: vSAN Storage Policies
Note: The exact steps may vary slightly based on the version of vSphere Client being used. Make sure to adjust any specific configurations based on the latest guidelines and available features in the interface.
Explanation:
To create the required vSAN storage policy in the vSphere Client for a VxRail stretched cluster, follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to Storage Policies:
From the home screen, go to Policies and Profiles in the left-hand navigation pane.
Click on VM Storage Policies.
Create a New Storage Policy:
Click Create VM Storage Policy.
Enter the name as vSAN Stretched Cluster.
Click Next.
Configure Policy Rules:
In the Policy Structure section, choose Enable tag-based placement rules if needed.
Click Next.
Add vSAN Rules:
In the Storage Compatibility section, click Add rule and select vSAN.
Configure the following:
Primary level of failures to tolerate (PFTT): 1 failure - RAID 1 (Mirroring) Secondary level of failures to tolerate (SFTT): 1 failure - RAID 1 (Mirroring) Failures to Tolerate: 1 Provisioning type: Thick Provisioning Ensure "Force Provisioning" is enabled. This allows the VM to be provisioned even if the current resources do not satisfy the policy.
Set Data Services:
Skip the Data Services section if not applicable.
Click Next.
Review and Finish:
Review the policy settings.
Click Finish to create the storage policy.
Apply the Storage Policy to VMs:
Navigate to the VMs section.
Select the VMs that need the new storage policy.
Right-click and select VM Policies > Edit VM Storage Policies.
Choose the vSAN Stretched Cluster policy for the applicable disks.
Reference:
VMware vSAN Storage Policy Creation Guide: vSAN Storage Policies
Note: The exact steps may vary slightly based on the version of vSphere Client being used. Make sure to adjust any specific configurations based on the latest guidelines and available features in the interface.
