Free API API-1169 Practice Test & Real Exam Questions
When is stress relieving exempt for welds in all carbon steel?
-Nominal wall thickness does not exceed 2 inches
-Thickness through the branch weld does not exceed run pipe thickness
-Nominal wall thickness exceeds 1 1/4 in
-Wall thickness exceeds 1 1/4 but less than 1 1/2 inch
-Nominal wall thickness does not exceed 2 inches
-Thickness through the branch weld does not exceed run pipe thickness
-Nominal wall thickness exceeds 1 1/4 in
-Wall thickness exceeds 1 1/4 but less than 1 1/2 inch
Correct Answer: C
Vote an answer
When an excavation is within ____ of a pipeline facility an OQ qualifies representative shall be continuously present during all backfilling and
Correct Answer: D
Vote an answer
What are some examples of loss prevention systems that the inspector should be familiar with?
Correct Answer: C
Vote an answer
Welding procedures and welders performing work for new construction and out of service pipeline systems operating a hoop stresses of 20% or more of the specific minimum yield strength shall be qualified under which standard.
-API 1104
-ASME section IX
-API 1104 or ASME section IX
B31.4/B31.8 and API 1104
-API 1104
-ASME section IX
-API 1104 or ASME section IX
B31.4/B31.8 and API 1104
Correct Answer: B
Vote an answer
What are the three basic types of hydrostatic pressure tests?
Correct Answer: C
Vote an answer
According to Title 49, CFR 192: A class 3 location is any class location unit that has ______ or more buildings intended for human occupancy.
Correct Answer: A
Vote an answer
